Quote:
Originally Posted by Mike Parker
Hi Neal
Your .5 needle/nozzle combo should be fine
Mentioned already by Kenny createx is probably the best known brand you can use although I've used hobbynox without issues
Thin by 3/1 don't be overly concerned about the shelf life after reducer has been used, just as long as its kept out of cold and paint is given a good mix next time its used should be fine
I tend to use reducer, tap water if I don't have any. You can use any reducer whether it be RCS, hobbynox etc it's not vital you have to keep to same brand as the paint you use
One thing though do not use a chemical based thinner/reducer on water based paint
|
Cheers Mike, i'll try getting some createx next. I was a bit confused by their auto-air range, airbrush colours and wicked range, which to use, etc. some don't seem compatible.
I picked up a hobbynox reducer, but not had chance to use it yet.
3:1 ratio, do you mean 3 paint to 1 reducer, or the other way round?
I've been recommended RCS paint, but it doesn't seem to be available now.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric |
Batley Buggy Club |
YORCC |
RHR |
MB Models
---------------------------------------------------------------------------------------------------------------