Quote:
Originally Posted by Welshy40
Problem I have is i dont have a machinist close by and do use a teamline hub so would use those knuckles if I could machine down. Issue is my cars stupidly fast so if it starts coming lose its gone, vibration comes into effect as soon as it comes loose.
Ive got an idea on doing a 3d print but with a thread lock nut size hole within the knuckle to fit a thin threadlocked nut in to guarantee it staying in. This is causing me major problems at the moment and need a resolve quickly.
|
I have designed a arm set that is direct fit on ZX-5 C hubs and knuckles. The C hubs are pretty tough if you keep both screws of the knuckles in. Good thing about the ZX-5 knuckles compared to OT-16 is it is 22mm high opposed to 19mm, which means more area to grab, and it uses M3 screw with a bushing at the bottom, which wont come loose and is smooth.
You also have an option to use 3racing alloy knuckles.