Hi
I have a complete Meteor (early) and another (later) in parts languishing my loft, along with a few Apaches, etc.
Both are short wishbones and chassis.
If I remember properly, it seems that the rear hubs on the later one do not have bearings and solid upper links. Is this correct?
Have machined the intermediate gear so it is ballraced.
Over winter I will try and find some time to rebuild one up properly. I would like to fit the longer wishbones but they are hard to come by.
If someone could measure theirs up I could have a go at 3D printing some.
Cheers
Anthony
|