Hi Redscott,
Just some simple things that i've done..
Use a smaller spacer (types use in the front hub) and associated/losi seals in the shock seal housings
Cut down turnbuckle ball-ends on shocks to increase droop
Thin out the the diff gear (inside the diameter of the balls) to free up the diffs - Aero will be releasing this mod soon.
Takes some material of the steering arm to stop bump steer
I've also experimented with slipper pads and settled on the standard white to drive the front and a losi xx4 yellow to drive the rear (need to cut this to fit the hex in the gear). This gives slightly more drive to the rear than standard, this may be a personal preference thing...
How you getting on with yours over there?
|