Thread: Wheelbase
View Single Post
  #3  
Old 04-08-2014
Clive Loynes's Avatar
Clive Loynes Clive Loynes is offline
Senior Member
 
Join Date: Jan 2014
Location: Camblesforth
Posts: 394
Default

You are adjusting the "track" rather than the "wheelbase" and as Ashlandchris has said there is a BRCA limit.

I found that the front of the Team-C 2wd cars does not fit in the gauge box until you remove about 1mm from the end of the stub axles so if you have taken the wheel rim or tyre out past that point then it will not be legal.

At the rear, it depends which tyres you are running. I found that my TC02C was a good fit in the box when using the kit tyres. These overhang the wheel rims quite a bit so when you fit something like a Schumacher mini spike there is room to make the track a few mm wider. I made some aluminium hex drives to do this.
Reply With Quote