Here's what I've been running recently round RHR. Sorry it's not in a setup sheet.
Rhr test. Centro c4.1 26/02/12
Front shocks*
35 wt. stamdard no. 2's. 0.060 limiter*
AE Silver springs
Middle on tower, outer on wishbone*
Rear shocks*
30 wt standsrd no. 1's. No limiters. AE Silver springs*
2nd hole on tower from inside, inner on wishbone*
FT 0.5 degree hubs With c hub lower towers
Medium wheelbase*
Inner camber link 3rd hole from bottom On tower*
0.060 front ballstud washers*
Front link Inner on tower.*
Inner on hub.*
30degree caster blocks*
Hub in middle*
7.5 motor spur 75t. Pinion 23T
22mm ride height all round*
Jconcepts High clearence wing, 1 gurney showing.*
Plastic bulkhead
Rudebits Trapezium brass weight in front of steering rack*
Avid Aluminium steering rack*
Rude bits thick under servo weight*
Slim stagger ribs*
Yellow rears, inside and out cut off.*
Jconcepts Finnisher cab forward body*
Feel free to ask any questions
Ben
__________________
Schumacher Racing - Reedy - Schelle - TKR - Bandicoot Bodies - MIP - Nextlevelrc - Trishbits - Moss Models
|