Quad flight videos...

[neallewis]

Here is my latest quad flight video, where I try my Naza in Attn mode, and then have a practice in full manual mode (switched in at 2:30) and in and out of that mode afterwards. its manic! going to need to practice in that.

http://www.youtube.com/watch?v=-YsLP-rmD4w

[neallewis]

Another video from tonight. Camera is struggling a bit in the sunset.

http://www.youtube.com/watch?v=MuXo-af3mtw

[simon]

A quick video of me trying some flips etc..great fun!..the quad is an armmatan 360 CNC ally quad...almost unbreakable.....1800kv motors..simon K flashed esc's..KK2 board.....I have a spare armattan quad for sale if anyones interested,,same specs..email simonlanc@aol.com
http://youtu.be/s2zP5RBGkZA

[andys]

Keychain camera on my 330.

Very, very windy in the local park, with my kids on their bikes. Ended up having to stop flying it as the wind kept taking it!

http://www.youtube.com/watch?v=NMw4lNi__x0

[neallewis]

Originally Posted by simon

A quick video of me trying some flips etc..great fun!..the quad is an armmatan 360 CNC ally quad...almost unbreakable.....1800kv motors..simon K flashed esc's..KK2 board.....

That's awesome Simon. Shows the potential of the KK2 board off well.

[simon]

Originally Posted by neallewis

That's awesome Simon. Shows the potential of the KK2 board off well.

Thanks...yes the KK2 board is very good..very easy to set up......and the simon K flashed esc's make the quad much more responsive....

[neallewis]

Originally Posted by simon

Thanks...yes the KK2 board is very good..very easy to set up......and the simon K flashed esc's make the quad much more responsive....

Which model of ESC are they? Also, what motor/prop combo?

[Danny Harrison]

Originally Posted by simon

A quick video of me trying some flips etc..great fun!..the quad is an armmatan 360 CNC ally quad...almost unbreakable.....1800kv motors..simon K flashed esc's..KK2 board.....I have a spare armattan quad for sale if anyones interested,,same specs..email simonlanc@aol.com
http://youtu.be/s2zP5RBGkZA

Nice quad,so powerful! How much for the spare? pm me

[rcflyers]

Here's a video of my aerobatic tricopter that I built

[RickRick]

First try, also first flight was the day before for 30 seconds, still some work to do setting up the quad, and probably a better camera mount

[neallewis]

Flight vids from today.

First was a bit of a fly about.
http://www.youtube.com/watch?v=vm_oBL_qlx8




Second with some crash action!
http://www.youtube.com/watch?v=bwRHUFQJK4s


First crash it just dropped out the sky at low speed/height. I felt one motor died as I did a low speed yaw. Prop stuck in ground, but it was all fine.

Second crash was my own fault. Lost both ends of a prop, and now that motor feels very tight, so probably a write-off? I thought that was the motor that failed in the first crash, and its had a hit on that one previously in my famous invert at a York school.

[andys]

Nothing to hit in the field except the goalposts - and you hit one

Looks like your flying & speed is getting better though

[neallewis]

Originally Posted by andys

Nothing to hit in the field except the goalposts - and you hit one

Looks like your flying & speed is getting better though

Yup, just clipped it with the prop tips. I thought i'd miss it.

Cheers, feels better and flying a lot more controlled now, I've stopped messing with the gains and returned to my original values ;-)

[northernmonkey]

Uploaded a few more vids on youtube. clicky.

[andys]

Originally Posted by neallewis

Yup, just clipped it with the prop tips. I thought i'd miss it.

Cheers, feels better and flying a lot more controlled now, I've stopped messing with the gains and returned to my original values ;-)

Good stuff - I can't really mock you though - I put my 450 in the ground the other day. Flying it with 1.6++ is really hard. It's full acro unless the stick it centred - so I simply pushed a little too much in a turn and it went full beans into the ground, it's scary the angles it will try to fly at in acro mode !

Still not made the commitment to the Naza Lit for the 550 yet - but can't really see any other option. Is the latest firmware going to run on the Lite as well as the Naza V2?