SV2 issues

[trr061984]

Just got the SV2 built over the last week and a half. Not really got many problems with it but I do have a couple of questions.

First is, how is the lipo going to be held in? The top deck looks ok but after a big crash I can see the lipo coming loose. I suppose I need to velcro the bottom of the lipos as well?

Second, the top deck is a little irritating for getting the lipo in and out off. Do I have to keep unscrewing the four screws every time?

Cheers.

[jonathan may]

i have had no problems with the lipos falling out
i am using body clips to hold the top deck on but you can undo the 2 rear screws and slide the cells out the side

[mark christopher]

Originally Posted by trr061984

Just got the SV2 built over the last week and a half. Not really got many problems with it but I do have a couple of questions.

First is, how is the lipo going to be held in? The top deck looks ok but after a big crash I can see the lipo coming loose. I suppose I need to velcro the bottom of the lipos as well?

Second, the top deck is a little irritating for getting the lipo in and out off. Do I have to keep unscrewing the four screws every time?

Cheers.

how thick are you lipos?

[Swiss]

I don't put the back screws in. Just put a little foam under the strap as well. Then it just a case of removing the two front screws and pulling the lipo's out.

Paul

[trr061984]

Originally Posted by Swiss

I don't put the back screws in. Just put a little foam under the strap as well. Then it just a case of removing the two front screws and pulling the lipo's out.

Paul

Ok, thanks for the advice. We'll see how we go this week at racing.

[trr061984]

Originally Posted by mark christopher

how thick are you lipos?

About 2cm?