which mini 8ight pivot block bushes to use

[rondoolaa]

Hi,

What degree bushings do you guys recommend for use on the alloy pivot blocks on the losi mini 8ight,

Thanks for any info,

[markwilliamson2001]

Most are using 3 deg rear toe in with between 1.5 and 2 deg anti-squat...However, front end seems to vary, but a general consesus seems to be around maximum caster (fully rear ward angle).

Hope this helps.

Mark

[danmurphy]

I'd say try 3-4deg toe in on the rear, minimum anti squat and either 10 or 12deg castor on the front

[rondoolaa]

thanks