|
#1
|
|||
|
|||
K1 Lowered Shock Towers
I was having at look through some of the set ups on Petit RC, and noticed James Helliwell's set up for Batley Indoors has Lowered Towers. Anyone know how much these towers are lowered? Are they drilled and trimmed to fit? Ta.
|
#2
|
||||
|
||||
I understand these are from the Aero kit and negates the need to run the 3/4 ball cups that some have been running
|
#3
|
|||
|
|||
2mm lower, but you are correct they are standard on the Aero.
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#4
|
|||
|
|||
Whats the advantage of having 2mm lower towers
__________________
Touching cloth clothing |
#5
|
||||
|
||||
I would say lower c of g and 2mm more droop
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#6
|
|||
|
|||
Droop is the main factor, as it removes the need to run long ball cups on the shock - therefore not loosing any shock travel.
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC |
#7
|
|||
|
|||
Also the new shock top guards only fit with these towers on the k1 not the origional ones as i have found out
|
#8
|
||||
|
||||
I have the nut guards on my original k1
|
#9
|
|||
|
|||
How?
the screw holes are too high on nut guards for my towers so dont line up |
#10
|
||||
|
||||
dremel and washer on the screws
|
|
|