Ellis Stafford's modified 22-4 front hubs

[HeavyD99]

Does anyone know if the front 12.5* or 15* 22-4 aluminum front hubs, modified (milled down) for Astro/carpet as per Ellis Stafford, are available to purchase anywhere?

Did Stafford do the machining himself or did he have them done?

Thanks in advance,
DS.

[tyreman]

No you will have to dremel them yourself unfortunately.

[fletcher]

As stated above. It's a mod we all have done ourselves on the team. Fairly easy and with a dremel can be done in about 30 mins taking your time to make sure it's all done neatly and the correct amount taken off

[HeavyD99]

That's what I was afraid you'd say, lol. Ok, I'll enlist the help of my machinist friend then, he has a steadier hand than myself. Thanks.

[No. 46]

If you have a friend who is a machinist it's even easier on a lathe or mill. I did mine in the lathe in about 10 minutes for the pair

[tyreman]

Mine took about 5 minutes with a dremel.

[rcjunky]

Originally Posted by No. 46

If you have a friend who is a machinist it's even easier on a lathe or mill. I did mine in the lathe in about 10 minutes for the pair

Would ya be winning to share how you held them/general set up? I'm said friend and have an idea, but always welcome to other possibilities