|
#1
|
|||
|
|||
SV2 issues
Just got the SV2 built over the last week and a half. Not really got many problems with it but I do have a couple of questions.
First is, how is the lipo going to be held in? The top deck looks ok but after a big crash I can see the lipo coming loose. I suppose I need to velcro the bottom of the lipos as well? Second, the top deck is a little irritating for getting the lipo in and out off. Do I have to keep unscrewing the four screws every time? Cheers. |
#2
|
||||
|
||||
i have had no problems with the lipos falling out
i am using body clips to hold the top deck on but you can undo the 2 rear screws and slide the cells out the side
__________________
Schumacher cougar laydown |
#3
|
||||
|
||||
Quote:
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
||||
|
||||
I don't put the back screws in. Just put a little foam under the strap as well. Then it just a case of removing the two front screws and pulling the lipo's out.
Paul
__________________
Schumacher CAT K1 Schumacher Cougar SVII Schumacher Racing - Team Tekin - Spektrum - Inside Line Racing - TrishBits |
#5
|
|||
|
|||
Ok, thanks for the advice. We'll see how we go this week at racing.
|
#6
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|