Lazer zxr

[oli4ke]

Originally Posted by Welshy40

Cheers mate, if you can find a hyperclutch layshaft that should save the day.

Havent tried it but feels tighter, only issue is I cant use my 5.0 as the big bearing takes up a lot of room. Also ive only got two belts left wont be able to test it until my big race in january. Bit gutted as in front wheel drive in certain areas I was quicker than the top two drivers so would have been a pretty good set up. Still need my gearbox designed and built as the zxs hasnt stripped a belt yet and its got a 4.5 in it and is rapid so cant wait to have that in my zxr..

James, if you need more original belts LA-13 let me know maybe I can have 2 NIP belts for you...

[Welshy40]

Oli,

Cheers mate. Hold onto them for the moment. I may take you up on that offer, will let you know.

[oli4ke]

Originally Posted by Welshy40

Oli,

Cheers mate. Hold onto them for the moment. I may take you up on that offer, will let you know.

ok no worries mate

[moth898]

doesn't this look like the front gearbox, without the stuff behind the shock mount

http://www.ebay.com/itm/Vintage-Kyos...20281867672222

[Welshy40]

Originally Posted by moth898

doesn't this look like the front gearbox, without the stuff behind the shock mount

http://www.ebay.com/itm/Vintage-Kyos...20281867672222

Similar but no holes to the rear to attach to the chassis.

[isobarik]

Ron

I need to screw ...........hm that didnt sound right ...

I want to screw.....hm ....

I want to use my screwdriver ....hm .......

I wants some screws so i can ram my hexdriver in the screws hexagon hole ......doesnt sound super right but it can not be misinterpreted.

Btw ron have you seen the alu parts for the lazer on epay ???

mvh isobarik

[isobarik]

Moth

you better watch out for the postman !!!!

mvh Isobarik

[rondoolaa]

Originally Posted by isobarik

Ron

I need to screw ...........hm that didnt sound right ...

I want to screw.....hm ....

I want to use my screwdriver ....hm .......

I wants some screws so i can ram my hexdriver in the screws hexagon hole ......doesnt sound super right but it can not be misinterpreted.

Btw ron have you seen the alu parts for the lazer on epay ???

mvh isobarik

dunno, which ones? (gold, blue, red, black???)

[isobarik]

Ron you got pméd

mvh Isobarik

[Ema]

So, what is the right english expression for a feepay item like this one ?
What the fu** , sounds right ?

http://www.ebay.co.uk/itm/320805443165

I like the idea of getting an original zx-r body for my repro, but this is really tooooooooooooooooo expensive .

bye
Ema

[isobarik]

yeah that was kind of expensive ....

and when you look at it it looks so sharp compared to the avalible repos.

There was possible to get them from a swiss site but that was along time ago.

I still have my racetech body its new and uncut I have asked keith at kamtec if he wants to copy but no reply so i´ll guess hes not interested.

It looks exactly like the original one with the gearcover but the gearcover is inbuilt in the body.

mvh Isobarik

[Welshy40]

The gearcover built in actually wears a hole in the shell, had one binned it as it ruined my spur and shell.

Iso, any news on the layshaft?

[isobarik]

The racecraft is not the same as the wasp version it goes much higher .

Btw there was several lazers with the wasp body on when i raced back in the days and i havent heard them talking about burned spurs.

yeah im working on the slipper for the procat at the moment so i´ll guess soon ,sorry but i can give a more precise date.

mvh Isobarik

[Welshy40]

Originally Posted by isobarik

The racecraft is not the same as the wasp version it goes much higher .

Btw there was several lazers with the wasp body on when i raced back in the days and i havent heard them talking about burned spurs.

yeah im working on the slipper for the procat at the moment so i´ll guess soon ,sorry but i can give a more precise date.

mvh Isobarik

No problems matey. I thought mine was a racecraft one but the design of the cover going outwards was the issue, as if you rolled and got marshalled the shell was pushed and caused the problems. Still was a good idea.

[Welshy40]

Originally Posted by Ema

So, what is the right english expression for a feepay item like this one ?
What the fu** , sounds right ?

http://www.ebay.co.uk/itm/320805443165

I like the idea of getting an original zx-r body for my repro, but this is really tooooooooooooooooo expensive .

bye
Ema

Well over priced. In fact didnt I send keith a bodyshell for the ZXR? I will have to call him up and have a chat as once he makes that then it will be a good price for undertary and shell together.

[isobarik]

Originally Posted by Welshy40

Well over priced. In fact didnt I send keith a bodyshell for the ZXR? I will have to call him up and have a chat as once he makes that then it will be a good price for undertary and shell together.

I have sent him an body for the zxr and undertray and 2 gearcovers

but nothing


mvh Isobarik

[Kev B]

I have finally got round to making a list of the Kyosho Lazer ZXR and Mid Special parts plus maybe a few odd ball bits in there as well. Most of this is new in packets and will try and get photos soon.

LA-27 Front Hub Carrier x3
LA-59 Front Hub Carrier 7 deg x1
LA-28 Rear hub Carrier x1
LA-29 Upper Rod End Set x2
LA-63 King Pin ZXR x1
OT32 Ball Joint x1
OT5 Diff outpoint Joints x2
w- 5061 Swing Drive Shaft x1
LA-2 Spur Gear x2
HPI Wheels 3x Pairs
w-0109 Option House Ball Differential x1
OT45 Rear Hub
OT69 Suspension Arm Set
Rear Wheels x1
RW Spur Gear x1
OT103 Body tape Set
RaceCraft ZXR Shell x1 (brand new)
Optima Mid custom special body and undertray (brand new) x1
Optima Mid Custom Spacial Blue anodized chassis and top deck LWB x1

Cheers,

[Welshy40]

Originally Posted by isobarik

I have sent him an body for the zxr and undertray and 2 gearcovers

but nothing


mvh Isobarik

Ok well i will try to remember to call him next week and update you.

[isobarik]

Originally Posted by Welshy40

Ok well i will try to remember to call him next week and update you.

Ask him if he wants to make the racecraft also ????

Undertray and body are uncut so its easy to get an mold and the undertray are the same as the kyosho one.

mvh Isobarik

[lllyf]

what after market body will fit zxr，what brand of this body？