Shock rod ends

[stuey]

Hi peeps. I have some Associated shocks (V1?) from my B4 fitted onto an old Yoke MR4BC. It could do with a bit more droop, do Associated do a slightly longer shock rod end, say 3-4mm? The standard ones I have are 13mm from the end to the middle of the eyelet. I have two yoke ones from the kit shocks that work but I suspect they might be hard to find, like the rest of the car!
Cheers

[HOTSHOT III]

If you don't have any luck with AE you could try Schumacher, I believe their shock rods are 1/4" rather than 3mm so their rod ends will probably fit the AE shocks, give their tech dept a ring and see what lengths they offer them in

[stuey]

Ok cheers