|
#1
|
|||
|
|||
Mamba Max Pro and Sanwa RX 461 in DEX410?
Hi,
I want to start the building of my Dex410 next weekend. Therefore I have already bought 2 Mamba Max Pro Escs (one as replacement if something gets destroyed at the track) and one Sanwa RX 461. Now i saw that there is _very_ little space in the DEX410. Do you think it is possible to fit both deivices into the car? Or should I get other parts before using them? Did maybe somebody of you already use them and would be so kind as to share some pictures? Thank you!! |
#2
|
|||
|
|||
http://www.oople.com/forums/showthread.php?t=31939
http://www.oople.com/forums/showthread.php?t=86875 http://www.oople.com/forums/showthread.php?t=97701 Might find something in there, but, FWIW, that Rx is a monster! Will probably have to be mounted on its side....... |
#3
|
|||
|
|||
Quote:
Thanks, I already checked these threads, but did not find any specifics.. I think it could really become a problem with these two devices |
#4
|
||||
|
||||
I.did once see a mamba max fitted in a 410, the owner was pleased after being told by every one it wouldn't fit. Then his shell returned from sprayers, next time it was seen it had a speed passion in it...............
|
#5
|
||||
|
||||
Might work with a bulldog or RC Lexam shell as you have a bit more height?
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#6
|
|||
|
|||
FWIW, an ESC i bought as a spare is about the same size as that mamba, i could get it in, but getting the wires to clear both the prop, the spur AND the shell........ non-starter.
Then getting a Tx in (spektrum micro) just wasn't even worth trying. Ended up in the 2wd (and then exploded) |
Thread Tools | |
Display Modes | |
|
|