|
#1
|
|||
|
|||
New dex210 mid chassis!
I have been working on this for a while now and thought I would show some pics. Chassis is plus 10m, 7075 aluminum, weighs in at 1550g with heavy turnigy esc.
I plan on going into production on this if there is enough interest in it. Should be ready to go full on in the next 2 weeks, just waiting on the rest of my carbon fiber to show up!! |
#2
|
|||
|
|||
Sorry, will only let me post 1 pic at a time
|
#3
|
|||
|
|||
One more for now, this is fresh off the mill
|
#4
|
|||
|
|||
Looks great, love the innovation! Hope you sell a ton....Good Luck
|
#5
|
||||
|
||||
Have you thought about a chassis with a 210 front and 410 rear end
|
#6
|
|||
|
|||
I have, but it's not real popular here in the united states, but if there is enough interest I would do it. I have no problem with international shipping!
|
#7
|
|||
|
|||
Figured I would update this since I have made a lot of progress. Just finalized all the designs and it's 95% production ready, all I have left to do is the body mold. The supplies for that are ordered and should be here next week. Im going to do a cab forward body and a non-cab forward body that will fit the narrow chassis. The wing mounts raise the wing a full 12mm above stock location and gets it up where it needs to be, they are delrin, witch makes them very strong but also have some "give". Shock towers are 4mm cf, with the rear being the new -4mm geometry, and the front tower has the shock mounting locations moved up 2mm to use the v1 shocks with the new v2 flat arms.
Here are some updated pics 8C6EA0D98_zpscdiybzh3.jpg[/IMG] |
#8
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|