Electric Install Pics

[GRIFF55]

Lets see all you electric installs then!!! Anybody put speed passion gear in?

[_sleigh_]

Aren't the official press photos installed with Speed Passion electrics? ;-)

[GRIFF55]

Yes maye but i cant see where the cap or reciever is put Got a couple of options but wanted to know what others had done
Cheers Phil

[bender]

i wouldn't mind seeing a few pics either!.

think i need a new receiver for mine, just spent 2 days trying to shoe-horn all the electric in with no success. Using either a SP esc or LRP SPX combined with Futaba rx

[Carlos69]

RS Pro + SR3500 micro here

[derek5]

here is mine! using LRP SXX TC, Futaba 603FS, LRP 6.5, KO low profile servo....
the room spare is ok, but need time to fix the cable....

[Jedi Master]

Here's my install guys;

Running LRP 4800mah 40c Lipos (upside down or the lugs make them too big ) An MRT MX Pro ESC and a Spectrum Pro receiver. I only run on a small indoor track to will using a brushed set-up wth a 12x2 checkpoint. Still gotta find a slot for the transponder, but I can't run the car yet anyway as my shell is away being painted.

Comments welcome!

[trap121]

Looks good. What is the yellow stuff???Shrink wrap?? Tape???

[trap121]

Here is my setup.....

[JohnM]

Here's mine, LRP Sphere, LRP X12 6.5, mini Spektrum, Savox servo.

[CharlieF]

Hi Guys.
Nice instals, wish I had the confidence to post pics of my work. More to the point where are you guys putting the PT's assuming you will use one and I hav'nt missed it in the pics?

[trap121]

I plan to use one, just havent ordered it yet. I will probably have to cut the ears off and stuff in there somewhere. Its a tight fit

[JohnM]

Charlie, the only time I've had to use a PT so far, I stuck it down the side pod near the cells, there is room under the centre-front prop shaft for it though.

[discostu]

how come derek5 has diferent prop shafts to the others in the pics. i hope that durango dont start changing the style or design to regular.

[rc_penguin]

There an option part stu

[discostu]

cheers for clearing that up will i dont know about you but for £445 there should be no option parts.

[Jedi Master]

Originally Posted by trap121

Looks good. What is the yellow stuff???Shrink wrap?? Tape???

It's heat shrink. Just a small safeguard in case the grub screw in the universal joint works loose.

[Jedi Master]

Originally Posted by CharlieF

Hi Guys.
Nice instals, wish I had the confidence to post pics of my work. More to the point where are you guys putting the PT's assuming you will use one and I hav'nt missed it in the pics?

Will probably stick mine down the side next to the Lipo.

[Pedros20]

Here's mine, Savox servo, Nosram Brushless, Futaba reciever.

Since these pictures were taken i've secured the power cap & on/off switch.

Can't wait to run it now, just waiting for the shell.

[Full Metal Jacket]

Originally Posted by discostu

how come derek5 has diferent prop shafts to the others in the pics. i hope that durango dont start changing the style or design to regular.

This is the optional alu. shaft though, nice one!