|
#1
|
|||
|
|||
lrp sxx v2 help
hi all was out racing at yatton club sunday
and my sxx just packed up i have checked evething i can its just dead no power no nothing only thing i can see wrong with it is on the back where the sensor lead is it has split the case has anyone ever had this ? our is there any where i can send it to get fixed ? |
#2
|
||||
|
||||
Where did you but it from these are covered by a life time warrenty . All you need is your original receipt , download a returns form from the smd website and post. Easy .
|
#3
|
|||
|
|||
I don't have the receipt as a x girl friend got it for me and I no longer have contact with her :-(
|
#4
|
|||
|
|||
The BEC on these are weak. Try by applying external power to the receiver lead to see if it then comes on. You can get a new improved board for about £45.
|
#5
|
|||
|
|||
Check the switch/switch wire it could be that if theres no power at all
|
#6
|
|||
|
|||
Hi there I have checked all the wires all fine. it must be the board as every thing has just gone checked servo and receiver with another speedo and all is working.
First time in 4 years it has let me down :-( Is there any checks I can do befor I buy another board as I don't wont to wast £40 to find out its not that would this be normal if the Bec our board have gone total loss of everything ? |
#7
|
|||
|
|||
Quote:
is it just connect the 4 battery box that nitro cars run into the receiver ? |
#8
|
|||
|
|||
Yes, leave the SXX switch off and use a 4 AAA box to power it up.
|
#9
|
|||
|
|||
Just ourderd a new board from amd fingers x it fixes it
|
#10
|
|||
|
|||
All fixed and my god that new board has mad my car so much faster :-) :-)
|
#11
|
|||
|
|||
wtf not happy at all
my speedo has just stoped working again was enjoying a good day racing at worm and 3rd race one lap in then nothing speedo is lighting up buzzing a little bit then getting very hot very fast had my lrp sxx v2 almost 3 to 4 years no problems atall . then in the space of one month it has gone 2 times help |
#12
|
|||
|
|||
It looks like one or more of the motor drive FETS have now blown so not covered by the warranty on the new board!
|
#13
|
|||
|
|||
what could of caused this to happen ?
|
#14
|
|||
|
|||
Electronic components can fail for no obvious reason or the motor could have stalled putting stress on the weakest FET causing failure.
Which model was it, StockSpec, Competition, or TC as I may have a spare FET board? |
#15
|
|||
|
|||
hi there it is the sxx v2 competition with the new bottom board in it as the bec went in the last one
|
#16
|
|||
|
|||
Any one got a fet bourd for this speedo .?
|
|
|