|
#1
|
|||
|
|||
KF2 front end spacers
Hi guys. I have noticed on my KF2 that the front steering arms are quite sloppy on the king pins, and that the quick clip in spacers to adjust the height are too thin allowing for some up and down movement. As the kingpin is quite thin in diameter, I'm not sure where to find some suitable spacers to replace the clips and get rid of the slop. Can anyone recommend a source the correct thickness and diameter please?
|
#2
|
|||
|
|||
To answer my own question, I used Avid 1.25mm ball joint washers.
|
|
|