|
#1
|
|||
|
|||
x2 5th at Austrian Nationals
Hi anybody,
with bad luck only 5th at the Austrian Nationals The weather only allows 5 heats of qualyfing. In the last heat I was second behind multiple Euro Champ Hupo Hönigl with only 1 second gap!!!. http://www.myrcm.ch/at/gmacl/2011070...STM/index.html But I had the faster lap |
#2
|
|||
|
|||
Wow, good result! any pics?
Like to see the x2! |
#3
|
|||
|
|||
Congratulations!
What surface were you running on? Any setups would be nice! |
#5
|
|||
|
|||
here my setup
Here my setup
Sorry but setup sheet is to big for upload. Med traction, slick dirt, flat, less bumps Rear tower, drilled 4th hole 1° Rear c hubs in reverse (2° total - std is 3°) camber link: tower inside up, c-hub inside no shim rear arm mount inside long wheelbase with std chassis 20g brass weight in rear plastic brace (drilled holes for mounting) Shock oil: 150 Asnmann Spring: Big Bore Soft white pistons big bore Camber -0,5° Tyres: PL Bow tie M3 with 2 Stage front Caster 25° std bump steer 2 shims outside Toe in: 0° Shock oil: 200 Ansmann Spring: Big Bore Hard black pistons big bore Camber: -1,5° Tyres: Groovy super Soft Camber link (inside inside with 2 shims, outside (caster hub: inside) shock position tower: inside shock position front arm: outside Motor: Xirius brushless 6,5 ESC: Xirius Pro brushless 86/22 with all titanim screws lunsford and boca full ceramic bearings bfast diff car weight: 1500 g |
#6
|
|||
|
|||
By the way...
by the way in the last quali heat I lapped Martin Kreil. He was driving the new durango 2WD!
|
#7
|
|||
|
|||
__________________
I shop at www.tcmodels.net |
#8
|
|||
|
|||
here one pic
|
|
|