|
#1
|
||||
|
||||
Cougar SV gearing
Could someone suggest what size pinions/spurs would work with a LRP X12 7.5 motor?
Would be useful to get some ordered up now so it's here when the car arrives. |
#2
|
|||
|
|||
Me & Si have both been running 24/83 outdoors on Speed Passion 6.5/7.5's. I'm not sure what Grant has been running but I'm sure mike will be able to tell you when he sees this.
__________________
Yokomo - LMR |
#3
|
||||
|
||||
Much obliged kind sir
|
#4
|
||||
|
||||
is the gear ratio the same as b4/x6 ? and does it use 48dp pinions?
cheers |
#5
|
||||
|
||||
dont know about the ratio but it does use 48dp
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#6
|
|||
|
|||
With 23/33 external ratio gears I think the overall ratio is 2.6:1, so the same as a B4 gearbox
__________________
Yokomo - LMR |
#7
|
||||
|
||||
Grants is running Nosram Pearl Evolution ISTC with a Nosram Pure 7.5 , plenty fast on 24/83 with standard internal gearing, and running cool.
Mike
__________________
Retired Racer |
#8
|
|||
|
|||
im guessing 83 spur is what comes with the kit ?
Im putting a speed passion 8.5t v3 in with a speed passion LPF v2 , Any recommendations on settings and gearing ? im guessing start at 23/24 pinion ? |
#9
|
||||
|
||||
Quote:
I would say higher, 25 at least. |
#10
|
|||
|
|||
Is 80T the smallest Schumacher offers? Thats too big to get the right gearing for spec racing here in the states.
|
#11
|
||||
|
||||
That's what I'm going with poss 26 with my 8.5 and LPF.
Just need a car now |
#12
|
|||
|
|||
|
#13
|
|||
|
|||
In some CAT SX threads it was mentioned that AE spurs fit ith the centre hole expanded to 8mm. Pad size seems to be the same.
__________________
NRW Offroad Cup |
#14
|
||||
|
||||
Pad size is not the same. the Schumacher one are smaller than the Asso ones.
Mike
__________________
Retired Racer |
#15
|
|||
|
|||
To answer Kwiksi then. Use Ae spurs and expand the centrehole to 8mm. Also use Ae pads.
|
#16
|
||||
|
||||
I have had no problems with the Schumacher stuff, just use it
And no hassle with buy this or that, make the hole larger, jump on one foot and blow your horn when finished, dialled |
#17
|
|||
|
|||
I think the problem is not the quality but rather the size of the Schumacher spurs. For stock motors, you'll need spurs in the lower 70s.
__________________
NRW Offroad Cup |
#18
|
|||
|
|||
What ratio do you need for stock motors?
__________________
Yokomo - LMR |
#19
|
|||
|
|||
Quote:
Here are some starting suggestions that I have gathered for diff. mfr's starting points. An 80T is too big to get these ratios. Epic cans 6.0:1 to 6.5:1 for 17.5 7.5:1 to 7.0:1......13.5 LRP can 5.5:1 for 17.5 6.5:1 .....13.5 Speed Passion 4.6:1 to 6.0:1 for 17.5 4.8:1 to 6.0:1......13.5 Novak 6.5:1 for 17.5 7.0:1......13.5 |
#20
|
|||
|
|||
What does a spur cost U? 3$? AEs are available at 78, 75 and 72. Bring out tha calculator and do the math
|
|
|