|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
28-08-2018
|
||||
|
||||
INSPIRE4 1/10th 4wd buggy
hello this is a project I'm working on its called the INSPIRE4
+++ INSPIRE4 spec list +++ *Quick diff height adjustment, just loosen 3 screws on the chassis and slide a shim under the gearbox also easy to remove the whole diff case with the same 3 screws without affecting any of the suspension . *Quick diff change without the need to remove the whole diff case or affecting any of the suspension. *Low diffs front and rear. ... *Left-right, front-rear wishbone are the same complainants. *Front and rear bulkheads are the same *The buggy has the lowest CG of any other rc buggy on the market. *Adjustable front kick up and caster. *Adjustable anti-squat plus the option to run pro-squat. *Inboard suspension design with the dampers mounted as low as possible. *Easy adjustable rocker ratio. *Unique to the “INSPIRE4” a cross over quad rocker rear suspension system. *Suspension geometry designed from scratch. *Quick release spur gear. *Chassis layout to achieve a 50/50 weight distribution (depending on electronics). *Adjustable chassis flex *Large angled side pods to increase ground clearance when the chassis rolls through the corners and decrease the chances of chassis rub. *Flat chassis design *No shock towers to disturb the air flow to the wings and body shell. *CFD software used when designing the car. *Minimal weight passed the front and rear axles. *Wings mount perfectly over the centre line of the axles. check out its facebook page https://www.facebook.com/MRO-Racing-757539404314286/ 
|
|
#3
29-08-2018
|
||||
|
||||
|
Quote:
as soon as everything is in place for the kickstarter then all photos will be released but for the meantime ill be releasing body on photos with the most resent being posted on the Facebook page.
|
|
#5
30-09-2018
|
||||
|
||||
|
Yep put me down 4 2 kits straight off
__________________
HOT BODIES R A B HOBBIES TEAM POWERS K.E.O.R.C.A
|
 |
|
|
Hybrid Mode
