Great customer service

[Ianhunt]

The idea is just to try somewhere different thats all

[mugenmark]

my friends have 1/8th hong nor electric truggys he uses a1300kw electric motor this is about as powerfull as you can get.on a drag race{100 meters plus}the nitro wont get past till{that my mugen and a nice 5 port rb engine}top of the revs,it the way you gear electric you gear down to get more revs {less strain on the engine}you need to get good lippos these aint cheap but over a 100 recharges,cheaper lipos are avaible,for instance if you use a 2000kw motor you can get away with 14 volts,{less money}some 1/8th use 2700kw or 2400kw,it depends on power and speed.heres a link for lipo batterys, http://www.bigsquidrc.com/lipo-battery-shoot-out/,it gives you speed and times for lipos

[mugenmark]

lipos cost about £50 to 60 pounds for the good ones,20 to 30 mins run time{depending}the real cost is the esc and motor £150 to 250 for the good stuff,ie redline and mostermambo,hong kong will do you 2000kw motor £55 and a speed controller £60 it a cheap way to start.

[mugenmark]

Originally Posted by Ianhunt

Hi Mark, assuming you look after the lipo how many races can you get out of a £250 pack?

it about £50 to 60 pounds for good lippos and a 100 plus recharges,it depend on the voltage,7.4,14.8 or22.2 or 25.2,

[Ianhunt]

Mark are you coming sunday?

[mugenmark]

should be ,unless i smash my cars sataday slough,

[Ianhunt]

Originally Posted by mugenmark

should be ,unless i smash my cars sataday slough,

Good luck

[mugenmark]

they survived but boy need they need cleaning,only just finished,met up with a small club like ours,lots of electric car,trucks and nitro buggys.just the kind we need to bolster membership,