Go Back   oOple.com Forums > General > Vintage RC

Reply
 
Thread Tools Display Modes
  #1  
Old 21-09-2017
oldenoughtoknowbetter oldenoughtoknowbetter is offline
Banned
 
Join Date: Mar 2017
Location: staffordshire
Posts: 129
Default cat 2000 ec project

Im looking for some advice regarding my cat 2000 ec. Recently picked up a rolling chassis very cheap and looking to use a lipo set up in it. Has anyone got any experience of using lipos in an ec? will it take a shorty or a saddle pack?
I also need to find out what lipo tray it will need.
The buggy is going be used as a runner so any advice regarding essential upgrades would be appreciated.
At present it only has plastic shocks. Is this normal for an ec or have rhese been replaced?
It also appears to be running blade drive shafts and not rollers
Love the look of the ec cant wait run it
Reply With Quote
  #2  
Old 21-09-2017
Danf1275 Danf1275 is offline
Member
 
Join Date: Nov 2013
Posts: 127
Default

I run saddle packs in mine, uses some AE carbon locators and KF straps and posts, if I remember correctly - very tight for space though. Should have dark greeny grey anodised pro shocks on it.
Reply With Quote
  #3  
Old 21-09-2017
oldenoughtoknowbetter oldenoughtoknowbetter is offline
Banned
 
Join Date: Mar 2017
Location: staffordshire
Posts: 129
Default

Quote:
Originally Posted by Danf1275 View Post
I run saddle packs in mine, uses some AE carbon locators and KF straps and posts, if I remember correctly - very tight for space though. Should have dark greeny grey anodised pro shocks on it.
yeh i thought they might have been cheaper plastic shocks that were put on. ill replace them at some point. yeh it does look tight for space, going use top deck for spektrum rx so that should save a bit of space. have you got a code for the ae locators or kf straps? thanks
Reply With Quote
  #4  
Old 21-09-2017
Kev B's Avatar
Kev B Kev B is offline
Member
 
Join Date: Feb 2008
Posts: 214
Default

Just use b44.2 trays and carbon bars. Fits standard holes fine
__________________
Kevin Bishop
K.B. Design https://m.facebook.com/KBGraphixandD...?ref=bookmarks
Cat 2000ec, Club 10 Cougar, SST Rally and touring. All about the Vintage Racing.
Reply With Quote
  #5  
Old 21-09-2017
oldenoughtoknowbetter oldenoughtoknowbetter is offline
Banned
 
Join Date: Mar 2017
Location: staffordshire
Posts: 129
Default

Quote:
Originally Posted by Kev B View Post
Just use b44.2 trays and carbon bars. Fits standard holes fine
great stuff thanks for that
Reply With Quote
  #6  
Old 21-09-2017
fidspeed's Avatar
fidspeed fidspeed is offline
Mad Member
 
Join Date: Dec 2009
Posts: 1,288
Default

I made my own
used some 3mm hex standoffs (easily found on ebay ) and sst /cat 3000 straps easy to make your own too


regards dave
Reply With Quote
  #7  
Old 30-09-2017
oldenoughtoknowbetter oldenoughtoknowbetter is offline
Banned
 
Join Date: Mar 2017
Location: staffordshire
Posts: 129
Default

Quote:
Originally Posted by Kev B View Post
Just use b44.2 trays and carbon bars. Fits standard holes fine
Tried the b44.2 trays. holes are no where near close to fitting
Reply With Quote
  #8  
Old 30-09-2017
Stuntmonk1's Avatar
Stuntmonk1 Stuntmonk1 is offline
Member
 
Join Date: Apr 2014
Posts: 102
Default

The b44.2 trays do fit, however you do have to squeeze them a bit to make them fit.


Cheers Mitch
__________________
Mitch Fiddling
Team Schumacher: K2, KC, SV2, MI6 EVO
Vintage Rides: Schumacher Fabiix, Losi XX CR, B2, XRS, xk98 x2, Procat, Bosscat Works, Cat 2000 EC'S, Yokomo YR-4 II, Kawada M300, XX4, Cougar 2, Schumacher Fireblade and many many more...
Reply With Quote
  #9  
Old 22-09-2017
isobarik's Avatar
isobarik isobarik is offline
Mad Member
 
Join Date: Sep 2008
Location: Sweden
Posts: 1,576
Default

Quote:
Originally Posted by oldenoughtoknowbetter View Post
Im looking for some advice regarding my cat 2000 ec. Recently picked up a rolling chassis very cheap and looking to use a lipo set up in it. Has anyone got any experience of using lipos in an ec? will it take a shorty or a saddle pack?
I also need to find out what lipo tray it will need.
The buggy is going be used as a runner so any advice regarding essential upgrades would be appreciated.
At present it only has plastic shocks. Is this normal for an ec or have rhese been replaced?
It also appears to be running blade drive shafts and not rollers
Love the look of the ec cant wait run it
ec rollers driveshafts should have the plastic shocks

ecs the special with blades should have the greygreen anodized ones....

mvh isobarik
Reply With Quote
  #10  
Old 22-09-2017
oldenoughtoknowbetter oldenoughtoknowbetter is offline
Banned
 
Join Date: Mar 2017
Location: staffordshire
Posts: 129
Default

Quote:
Originally Posted by isobarik View Post
ec rollers driveshafts should have the plastic shocks

ecs the special with blades should have the greygreen anodized ones....

mvh isobarik
looks like mine might be a bit of a mix then
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com