Dex210 RR suspension mount help

[StuartH]

I cracked the plastic one on my dex210 at the weekend and ordered a brass replacement part. The brass part has a larger cup/ hole where the hinge pin goes into as opposed to the tight fit of the plastic version.

When I put it all together the whole rear suspension arm rocks side to side as there is nothing to clamp the pin in place. Is there something I'm missing or doing wrong here? Do I need to put something inside the cup to hold the hinge pin?

Sorry very confused?????

[wjames]

I think you need these bits..
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCCCB

(Other retailers are available)

I've only just got my 210 so may be wrong

[Joshyjol]

Yep you need pivot balls as the gent linked above!

[StuartH]

Oh poo! More stuff to order then. I am beginning the RTR version has quite a few corner cutting savings on the components as none of the pivot balls appear on any of the suspension links.

[Joshyjol]

Originally Posted by StuartH

Oh poo! More stuff to order then. I am beginning the RTR version has quite a few corner cutting savings on the components as none of the pivot balls appear on any of the suspension links.

They just made the RTR more basic, no aluminium RR hanger!

Let me check my spares and see if I have any of these spare, how many you need?

[StuartH]

Just two mate, everywhere seems to be out of them!

[Paultje040]

MB has a very large stock of Durango parts!

CLICK

[Paultje040]

i also noticed that the V2 only uses 2 pivotballs ont the RR hanger and none on the RF hanger

Knipsel.JPG

[Joshyjol]

Originally Posted by StuartH

Just two mate, everywhere seems to be out of them!

Sorry dude, dont have any that I can spare

[rcjunky]

Originally Posted by Paultje040

i also noticed that the V2 only uses 2 pivotballs ont the RR hanger and none on the RF hanger

Attachment 66260

Thats because the new(ish) type B RF pivot doesn't use them, makes it much thicker around the pin and is more durable.