Problem with a new spektrum system

[Nick K]

Just treated myself to a spektrum dx3 system but i seem to have a problem with it
When i switch it on all seems ok for about 30 seconds then the light goes of on the reciver. If i turn thr tranny off and on it works again then stops.
I have tried reseting it again and again .
Anyone had this problem ? feel like sending it back and sticking with ko 40mhz.

[pro4nut]

What are you running it in and what electronics are you using?

Could be faulty though

[OldTimer]

Sounds like you speedo has a weak BEC, which cannot supply the volts to your receiver, i had this with the LRP QC2 as soon as i tried the steering the light would go out on the receiver, simple to fix just get the SPM1600 Spektrum receiver voltage protector, since i fitted that i did a whole meeting with no problems.

But if you can let us know what gear you run, just in case its something else.

[paulc]

he's running the lrp brushless sphere comp think i might hang back on getting my spektrum as i am running the same speedo if that is the problem

[OldTimer]

I have run the exact same speedo with Spektrum in my S4 without any problems at all, so it maybe a faulty unit?.

[Nick K]

As paul said lrp brushles system in a zx5.
I will try the other reciver lata that came with the set.

[dave g]

yes a stutter stopper might work but it does sound an odd problem,almost as if the voltage regulator isnt holding up...does it go off even when not touching the controls?

a stutter stopper may work...i make them too,and on a Y splitter lead if your interested,so you wont lose any reciever slots.


dave

[Nick K]

Problem found to be a faulty reciver as suspected i tried it with in my nitro car with a 5 cell pack powering it and the same problem happened. If i tap the reciver i can make the problem come and go.
Will take it back to get it swapped