|
#1
|
||||
|
||||
B4 Hub Carrier Mod?
Anyone know how to convert the cougar to Run Asso B4 Front hub carriers?
I have seen a couple of guys running them, but have no idea what needs to be changed... Cheers! |
#2
|
|||
|
|||
I've done it a few times so that I could try the AE Inline Axles.
I took a 3mm drill and drilled out the Schumacher caster block and AE steering block (& axle), then used a 3mm pin of the correct length and secured it with e-clips.
__________________
Yokomo - LMR |
#3
|
||||
|
||||
__________________
SHUMACHER CAT SX SHUMACHER COUGAR SV |
#4
|
||||
|
||||
I can go through it with you at the next Saturday meeting at silverstone, will bring my tools with me.
Cheers, Jimbo. tools |
#5
|
||||
|
||||
Cheers Gents,
Jim, see you at MA.... |
#6
|
|||
|
|||
Quote:
I was thinking of trying the same, or doing something like the TL22 solution. Any plans from shumacher to test with parts from the 4wd? |
#7
|
|||
|
|||
wonder if the TRF201 would be a direct drop in
|
#8
|
||||
|
||||
or schumacher make them to not snap when you sneeze on them
|
#9
|
||||
|
||||
Or sell them at a reasonable price!!
|
#10
|
||||
|
||||
The in-lines are used to move the wheels forward to allow for more rear weight bias, but now with the new +8mm chassis, this mod isn't really needed.
__________________
SHUMACHER CAT SX SHUMACHER COUGAR SV |
#11
|
|||
|
|||
In-lines were OK in certain conditions but I didn't really like how they effected the ackerman, it just never felt right, so I just stick with the standard axles now.
__________________
Yokomo - LMR |
|
|