lunsford turnbuckle length or part number

[J_WOODY]

does anyone know the part number, or the length of the front camber link turnbuckle, on an ellis staffoed edition, i broke one today in a heavy crash

also a part number for the grey losi ball cups aswel, please.

thanks, Jay

[Paul_Sinclair]

Front CL turnbuckle for use with Losi ballcups: 1 5/8" long, # XF 6108

The part number for the HD Grey Losi ballcups: LOSA 6016

[J_WOODY]

Originally Posted by Paul_Sinclair

Front CL turnbuckle for use with Losi ballcups: 1 5/8" long, # XF 6108

broke another lunsford turnbuckle today,
Paul, the part number you've given doesn't appear when i do a search on the X-Factory uk website, the part number on the site is XFOM0205, and on the DMS website the part number is XFOP007.

i'll be ordering from DMS, so i'll go with the part number XFOP007

Jay.

[Darren Boyle]

HI Jay, the part numbers have gone through a few changes recently from the factory, the first number they used was the OP007, then they changed tempory when they installed a new system to OM0205, but now they have settled on XF6108 as Pual mentions, either way, each part number will take you to the very same thing.

The new X6 Sq EC kit uses the J Concpets ballcups now, the Ellis kit uses the LOis Grey ones as Ellis himslef used last season....

[J_WOODY]

Thanks for clearing that up, when using the jconcepts ballcups, do you use the same length turnbuckle thats used with the grey losi ballcups, that come with the Ellis kit?

[YoungChazz]

In the K 021 X - 6 Squared Kit we use 2" Lunsford turnbuckles for all four camber links and 2 1/8" for the tie-rods. These work correctly with the J Concepts ball cups.

In the rear, if you use the ES001 camber link extenders, the turnbuckle is shorter. Ellis uses the Losi gray ball cups as above, and I think that rear turnbuckle is 1 3/8" -- writing from home so not positive.