weight distribution xxxcr old type

[slow coach]

Hi Still running the XXXCR from somewhere around the bk version, I have just changed to lipo and the car was not good, i did soften the rear springs to go with the reduced weight but that didnt seem to work so next time will run pink rears, I have also added 20g to thr front under the steering links and servo link but think i will probably need some lead in the rear also just not sure how much, whats the split between front and rear normally for weight distribution im guessing slightly more rear than front to get the rear grip needed but what seems to be the sweet spot, any help appreciated.

Cheers Jason

P.S, anyone know where to get a XX4 WE these days, i take it losi stopped production again

[jono83]

hi i used to run a cr ideally you need to put a full strip of lead(roofing lead is what i used) under the lipo filling the battery tray i also used run around 20-30 grams in the front bulkhead area..

jono