Go Back   oOple.com Forums > General > 1/10th OFF ROAD

Reply
 
Thread Tools Display Modes
  #1  
Old 27-02-2018
Bigdawgracer Bigdawgracer is offline
Member
 
Join Date: Nov 2012
Location: East Hertfordshire
Posts: 272
Default Degreasing Chassis

Hi All,

I had an issue at the weekend that is a new one on me....need some advice please.

Picked up a new buggy last week and degreased the chassis using ‘brake cleaner’, as I always do.
I fitted the chassis skin but it wouldn’t stick!!!!
I warmed up the second skin AND the chassis and it stuck ok, but come the second race on Sunday it peeled off mid-race.........

The servo tape under the speedo also failed so i’m wondering whether the previous owner polished (!!) the chassis or.....?!

What should I be cleaning the chassis with, petrol, thinners etc.?

Thanks for reading.
Reply With Quote
  #2  
Old 27-02-2018
Karting's Avatar
Karting Karting is offline
Senior Member
 
Join Date: Jan 2012
Posts: 545
Default

I wash my Nitro Buggy with petrol. Then wash it afterwards with just water to get the residue off
Reply With Quote
  #3  
Old 27-02-2018
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,522
Send a message via MSN to mark christopher
Default

Better off using isopropyl alcohol or lighter fluid, leaves no residue at all
__________________
Dremel - MBModels - Schumacher Racing - Vapextech.co.uk - MRT - RCDisco
Reply With Quote
  #4  
Old 27-02-2018
reelman_fishing's Avatar
reelman_fishing reelman_fishing is offline
Member
 
Join Date: Apr 2007
Posts: 264
Default

If you want it to be 100% clean use preclean you can get it from a car paint supplyer, it's what they use in the bobyshops before paining
Reply With Quote
  #5  
Old 27-02-2018
alex97's Avatar
alex97 alex97 is offline
Senior Member
 
Join Date: Sep 2011
Location: Not to sure
Posts: 554
Default

Paraffin is great for degreasing
Reply With Quote
  #6  
Old 28-02-2018
mattr mattr is offline
Mad Member
 
Join Date: Mar 2011
Location: Sweden
Posts: 1,743
Default

Most automotive brake cleaners contain oil to prevent corrosion of the discs. It's not an issue for cars/motorbikes/etc as it evaporates off extremely quickly at normal operating temps.
It can cause an issue on MTBs as temperatures can be much lower.

And stickers won't stick either........

I use an oil free electrical contact cleaner.
Basically IPA in a spray can.
Reply With Quote
  #7  
Old 28-02-2018
RudeTony's Avatar
RudeTony RudeTony is offline
oOple Advertiser
 
Join Date: Mar 2009
Location: Sunningdale, Surrey
Posts: 1,601
Default

I would be careful using some of the suggestions because it could remove the anodising from your chassis
Reply With Quote
  #8  
Old 03-03-2018
Big G's Avatar
Big G Big G is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Apr 2009
Location: Lincoln
Posts: 2,660
Send a message via MSN to Big G Send a message via Skype™ to Big G
Default

I personally clean mine with brake and clutch cleaner with no problems like you've mentioned. Just make sure it's all gone before you start sticking things to it. Brake cleaner's pretty good at evaporating quickly usually.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
oOple.com