210/410 front Shock guard/spoiler

[Squidzilla]

Hi again another nub question from me

Im looking for a few sets of the tower guards for the front of my 210 and 410. to save the pretty Carbon towers, and after reading the guide on "wings" interested in how damming the front may help things.

Any links or pointers on where to look ? (I was pointed towards a oOple member, but he seems a pretty busy guy atm)

Thanks for help in advance....

[Dino_D]

Originally Posted by Squidzilla

Hi again another nub question from me

Im looking for a few sets of the tower guards for the front of my 210 and 410. to save the pretty Carbon towers, and after reading the guide on "wings" interested in how damming the front may help things.

Any links or pointers on where to look ? (I was pointed towards a oOple member, but he seems a pretty busy guy atm)

Thanks for help in advance....

This is for the Schu K1


Also M2C makes shock guards in plastic but only for 8th scale.
http://m2cracing.com/searchquick-sub...5?keywords=bra

[brooksy]

Wesj (Wes Jolly)on here does front tower guards. Don't know if it's him you've contacted but I and loads of people I race with use them.

[Squidzilla]

Yeh its Wes I have been in contact with, he seems a busy guy and I didn't want to pester him, so was looking for some alternatives for the time being.

[Col]

Bad pic - sorry!
It's a bit of cut out rear wing (the bit you cut off and throw away) mounted via the shock screws. Works perfectly, costs nothing (if you have a wing) and lasts years.

[brooksy]

Or you could use an old screen wash bottle,I've done that before as the plastic is a bit thicker.