Building an rc car

Hi there, I am looking to build an rc car pretty much from scratch, however I am quite new to rc cars so don't know too much about them. I am looking for Speed Test Scrabble Word Finder Solitaire somewhere that I could buy all the electronics and mechanics e.g hearing that can't be 3d printed, or a complete part list. Any help would be great Many thanks

[LongRat]

Sounds like your best bet would be to buy an RTR car, learn how it works, then replace all the mechanics you want to with your home made parts.

[dodgydiy]

as above, decide on a base vehicle with a drivetrain that suits your design, buy a secondhand roller and basically use the driveshafts, diffs,shocks etc. if you can use the hubs too, otherwise you will need to get them machined as printed hubs are not strong enough in experience. everything can be made, its just far more convenient and cheaper to use bought bits where you can in the longrun. took me 10+ hours to make a ball diff from scratch, takes under an hour to cad up mast parts for printing