|
#1
|
||||
|
||||
Ansman Macnum | build,pics and tricks
Ordered a Macnum Truck for 2 sec ago..did see that Silent_bob my clubmate have te Buggy, he passed by the club yesterday and i think it looks ral good...Since i have the B4 and S2 there is no need for another one, but we do have a truck class here...
So my Q are. Best place for spares UK or other. Bering size where i have to upgrade and how many? can the RT5 bearing kit fit? RC10T4 T buckles do they fit? What rims hex/fitment does this truck use? 12mm or? can a AE converison be done ? or so Last edited by jimmy; 01-06-2010 at 07:35 AM. |
#2
|
||||
|
||||
hi mate ae turnbuckles fit
and i converted the front end to t4 spec all i did was bore out the wish bones at front where the hinge pin goes through at they are a bit bigger than ae ones but other than that it was fine ae rear cvds are avalible from team c in japan or china but the kyosho truck wheels fit (think its 12mm) as for bearing i just looked on ebay and found them straight away for about 10pounds spares wise not sure on that one
__________________
|
#4
|
||||
|
||||
I buy my spares at TCModels.net
I use kyosho wheels. Have fun with your macnum
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/ |
#6
|
||||
|
||||
What lids do fit this truck?
Thundertigre AT-10 (old AE T3) Associated T4 Kyosho RT5? Let me know..and, how can i run the Kyosho wheels? arnt they Quickchange system |
#7
|
||||
|
||||
Ohhh yes, the truck kyosho wheels arent the same as buggy ones... sorry (I use buggy kyosho wheels on my Mad Rat)
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/ |
#8
|
||||
|
||||
So finaly i have ordered everything i need to start truck-class racing...or just to have fun. Not sure if it is needed, but who does not luuuv carbon fibre?
Got CarbonFibre Towers front and rear Truck Carbon T-plate Alu front arm mount Alu rear arm mount Motorplate Hex Then the regular plastic parts that will be needed for a race season..and a spare truck kit to WIll use Lunsford T-buckles with RPM cups..and finaly the Losi shocks, i have some 1.2 house here, so only 0.9 was needed..in combo with Team wave that i use in my other buggies i will have the 65r linear motor...IB4200 lipo...be back with pics.. |
#9
|
||||
|
||||
Recvied the tcmodels order...and i must say, wow, for the finish of the
front alu arm holder,rear, carbon towers!! and T-plate...motormount and hex..and all the other parts..i will have adedicated blogg for this truck, will be up later...all öics, building tips and tricks can be seen here... |
#10
|
||||
|
||||
Nice look forward to seeing all that stuff
|
#11
|
||||
|
||||
Some hopups arrived...
Started to sand and then CA sealing the tower, will finnish off me AUTOSOL polish and dremel for mirror look Here if you are interested, i have a blogg for the truck http://ansmannmacnum.blogspot.com/ |
#12
|
|||
|
|||
Inform us what you think about the t plate in carbon.
They will change the seeting?
__________________
Sorry if i don't speak english very well ... I'm french http://www.racing-cars.com/images/Ma...r_home_100.jpg http://www.racing-cars.com/ |
#15
|
||||
|
||||
Thomas, do you play table tennis?, they often seal the edge of the blade/bat with super glue (ca) and then polish it, like you are doing on the carbon
|
#16
|
||||
|
||||
Do you play table tennis nicefrog? I like it, and I play it as often as I can, though I'm not a very good player.
I like go kart as well I had a competition today, it was the 4th race out of 10 today.
__________________
Associated T4 TC5R Ansmann Mad Rat Amax Torche Pro monster truck |
#17
|
||||
|
||||
Yep, I play table tennis in competitions. I don't go kart though . I have had a drive of one only once. I was pretty fast (faster than the owner) but I didn't have enough money for that sport . So I just stayed with table tennis, did you see my orange and green truck ?
|
#18
|
||||
|
||||
Of course I've seen it It is a nice paint job! Looks pretty professional. I have put some stickers on mine, and it still has the starting number form the race
It looks pretty good with the stickers So you are a good driver as well Glad to hear that.
__________________
Associated T4 TC5R Ansmann Mad Rat Amax Torche Pro monster truck |
#19
|
||||
|
||||
Used to play on medium level..but now only rc car racing ...
2 trucks here on the table..box of Org hopups, some other parts are located on the Local PO, il be going there in a h or so |
#20
|
||||
|
||||
No , Lunsfords or Losi shocks, had no time, but i have started...
http://ansmannmacnum.blogspot.com/ |
|
|