|
#1
|
||||
|
||||
SV2 diff in a 2011 spec SV pro?
Hi there, I'm just doing some work on my cougar sv and have a lot of wear on the out drives so i'm looking to replace them. Will the SV2 out drives fit/work? as they look like a more robust design, but if they won't fit, i'll go with the standard SV versions. Any thoughts?
Thanks in advance, Oliver |
#2
|
|||
|
|||
Hi the sv2 diff fits but outdrives are shorter to allow more droop so need to be used with sv2 driveshafts.
Well worth the dosh imo |
#3
|
||||
|
||||
Cool, thanks for that. Just another thought, would the cougar svr drive shafts be too long? or would they fit okay?
|
#4
|
|||
|
|||
I think svr ones a longer again
|
#5
|
||||
|
||||
I've just had a quick look around - the SV 2011 driveshafts are 60.5mm long, the SV2 are 65.25mm long, and the SVR are 66.25mm so I suspect the SVR drive shafts will be a bit too long, but as you've said, the SV2 ones should be the perfect fit
|
#6
|
|||
|
|||
Hi I made this mod on myne, the SV2 are the good lenght.
|
#7
|
||||
|
||||
Awesome I'll definitely have to get some ordered then! Thanks for the help
|
|
|