|
#1
|
||||
|
||||
My Yokomo 93 World Championship Special
This reall all started nearly 2 years ago, I was talking to Reggie in Rc10Talk about some yoke parts that I was after and he told me that he was building one and was about $1500 into it.
He then said he's got some spare parts if I wanted them so that's how my WCS story started by gathering just some of the parts he had as I couldn't afford all of them. Since then I've been collecting parts to build a runner but instead of having the fragile 2M drive train I wanted the 3M as I had a slipper for it and it would be easier and less hassle. About 6 moths ago I was talking to a guy in Australia about some parts I was trying to locate, it turned out that he had a NIB one and one that was about 95% complete and he was thinking of selling the incomplete one. Well I jumped at the chance to own a fully original WCS and finally yesterday it landed. All I can say is I'm over the moon with it it need building and a couple of small parts but that's not a problem at all. Here's a couple of pics that he sent to me before I purchased it. In with the deal he had another original yoke chassis that I can use for my runner that I will still build. I just couldn't leave it in the box and not put anything on the chassis so I added a couple of bits while I was still at work. If you don't know about the 93WCS it's the transition car from the works 93 with the graphite chassis and magnesium bulkheads, to the 94 with the carbon chassis and the plastic bulkheads. More to follow when I get some proper time to sit down and build it up.
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#2
|
||||
|
||||
Not too shabby at all Justin
Looking forward to seeing it come together
__________________
[LEFT][/LEFT - Atomic Carbon CR2 SE - RB5 - ZX5- YZ10 - Bmax2 runners |
#3
|
||||
|
||||
Superb mate, i still could do that to mine if i had the few parts.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4
|
||||
|
||||
Thanks guys, you could James you'll only need a chassis, top deck, towers, ti screw set, WCS rear bulkhead, steering, front diff, rear diff, belts, M2 slipper and the turnbuckles
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#5
|
|||
|
|||
Lol top deck, chassis, towers no problem .... Everything else good luck
|
#6
|
|||
|
|||
Very, very nice, special, rare, great find Justin looks mint
|
#7
|
||||
|
||||
I couldn't leave it sat in a box for long so I had a spare couple of hrs last night so I built it.
Base of the front plastic bulkhead is the move away from the magnesium bulkheads Rear magnesium bulkhead with rear belt tensioner The pulleys on the TCS are plastic for the M2 belts for some reason
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#8
|
||||
|
||||
Rear send coming together now
Chassis done Just fitted the White steering for now I will replace it with a black one Just need to sort my shocks
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 Last edited by Peakey; 15-11-2015 at 04:57 PM. |
#9
|
|||
|
|||
so whats left to do?
|
#10
|
||||
|
||||
Sort the correct schocks out,
Trim the body and find some of the correct decals, Cut down and drill the wing, Change the steering to the black type now I've dug it out, Cutout and apply the wheel dots and then if I'm feeling brave cutout the rear bulkhead and drill the motormount like Masami's so just a couple of bits
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#11
|
|||
|
|||
Great build looks amazing nice to see such detail
|
#12
|
||||
|
||||
Coolest RC there ever was, so nice Justin!
lee
__________________
INSERT COIN
|
|
|