Go Back   oOple.com Forums > Car Talk > Team Durango

Reply
 
Thread Tools Display Modes
  #1  
Old 24-05-2014
4nd7's Avatar
4nd7 4nd7 is offline
Member
 
Join Date: Apr 2013
Posts: 65
Default DEX210 -2 LRC rear toe block

A bit new to the DEX210 so sorry if this is obvious but when using the -2mm LRC rear toe block how do you maintain 0 degree kick up? Is there Also -2mm lrc FR block?
Reply With Quote
  #2  
Old 24-05-2014
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default

Quote:
Originally Posted by 4nd7 View Post
A bit new to the DEX210 so sorry if this is obvious but when using the -2mm LRC rear toe block how do you maintain 0 degree kick up? Is there Also -2mm lrc FR block?
You don't, you get a 3 degree anti-squat with the -2 LRC block...

...unless you use the RF LRC hanger from Exotek (Link). I've been using it for a couple of races now, and the LRC, 0 degrees anti-squat and the V2 rear tower geometry work really awesome: The rear end seems to keep bite longer, but more importantly, it is more forgiving once it starts to lose traction

Of course, to test if you like the handling of the 0 degrees anti-squat you can Dremel 2mm off a plastic 0 degrees HRC hanger - it's not the most accurate solution and I think durability is questionable, but it's a cheap way to try it out before investing in new aluminium goodies.
__________________


3D Printing Upgrade Parts - FF210 Buggy
Reply With Quote
  #3  
Old 24-05-2014
4nd7's Avatar
4nd7 4nd7 is offline
Member
 
Join Date: Apr 2013
Posts: 65
Default

Thanks, jut the answer i needed.
Reply With Quote
  #4  
Old 30-05-2014
jonathan may's Avatar
jonathan may jonathan may is offline
Senior Member
 
Join Date: Mar 2011
Location: plymouth
Posts: 825
Default

So what anti squat should be run with the -2 lrc block ?
Reply With Quote
  #5  
Old 30-05-2014
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default

Quote:
Originally Posted by jonathan may View Post
So what anti squat should be run with the -2 lrc block ?
1mm height difference in either RF or RR hanger results in a 1.5 degree change in anti-squat. So whatever angle you were running before, if you switch from the 0 rear hanger to the -2mm one, you will hve 3 degrees more anti-squat.

The normal range of the DEX210 is 0 to 3, which is a good setup range. The DEX210V2 can only run 3 degrees with the standard parts.
__________________


3D Printing Upgrade Parts - FF210 Buggy
Reply With Quote
  #6  
Old 31-05-2014
jonathan may's Avatar
jonathan may jonathan may is offline
Senior Member
 
Join Date: Mar 2011
Location: plymouth
Posts: 825
Default

so if I have the 3 deg block on with the -2mm lrc block I will get 5 deg antisquat ?
Reply With Quote
  #7  
Old 31-05-2014
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default

Quote:
Originally Posted by jonathan may View Post
so if I have the 3 deg block on with the -2mm lrc block I will get 5 deg antisquat ?
You'll get 6 degrees - which is not within the usual setup window for 2WDs - if for any car, even...

I find the following website to be a very useful piece of reference for setups:
http://users.telenet.be/elvo/

The part about anti-squat is found at Page 4 about Suspension, and in the Setup Guide a stub and practical advice about it.

The 210 for that reason requires the 0 degree block in order to run 3 degrees, the V2 runs 3 degrees as standard and the kit doesn't contain parts to adjust the anti-squat as I mentioned before.
__________________


3D Printing Upgrade Parts - FF210 Buggy
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com