|
#1
|
|||
|
|||
BRCA Rules - Does the Durango fit the box?
Just wondering who knows whether the Durango Dex410 fits inside a BRCA box?
Or do i need to get the Dremel out? Thanks in advance |
#2
|
||||
|
||||
Hi mate.. you will have to dremel 2mm i reckon of the end of your front drive shaft.. and get yourself some of the core RC wheel nuts!
It will fit in the box then no probs |
#3
|
||||
|
||||
I've got the low profile nuts on the front wheels and I had to dremel them down in order to get the car to fit in the box, it's still fairly tight but it was passed at the Kidderminster regional.
__________________
Lets Off Road! |
#4
|
|||
|
|||
Nick and Bungleaio
Thanks chaps - ill get online now and get them ordered |
#5
|
|||
|
|||
Oh - just realised i already run the core serrated wheel nuts, axle is proud of them by say 3mm - so a littel dremmel work and i should be fine
|
#6
|
||||
|
||||
To fit the proper BRCA box (the one used at talywain) i had to grind the axles right down till they we're flush with the wheel nuts.
Hope that helps.
__________________
www.insidelineracing.co.uk |
#7
|
|||
|
|||
Yep pal thanks - thats what i will do tonight - reay for Bury regional this Sunday
|
#8
|
||||
|
||||
At our regional(mideast) on sunday, I'd already done my axles and it dropped in with room to spare. My mates 'rango with unaltered shafts fitted in no worries too. Go figure?
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#9
|
||||
|
||||
We had our first national this weekend, and they didn't fit into the box...
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom |
#10
|
||||
|
||||
Shanks, if you have any problems come and see me on Sunday at Bury.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#11
|
|||
|
|||
Quote:
Northy Cheers pal will do if need be then From what people are saying it seems maybe the boxes are different sizes? |
#12
|
||||
|
||||
oh, don't say that, I did it once, got shot down in seconds
__________________
Model Junction, Boughton Raceway. |
#13
|
|||
|
|||
Lol - only going of posts above - sometimes they fit - sometimes they dont - so either the cars are different or the boxes are |
#14
|
||||
|
||||
The one I fitted mine in is apparently the one they use for the nationals, it was made from aluminium and my car made some horrible noises from the front axels rubbing on it when it was moved about.
For info my car apparently has the later shorter axels but I still had to dremel a fair bit of material off of them.
__________________
Lets Off Road! |
#15
|
||||
|
||||
The box at our region (ME) was WAY bigger than the one at nats. -as Si says.
I too dremelled mine for the nats and mine fitted in the 'wooden' box easily. But if your doing nats, it will rub, but they seem to let it go. |
#16
|
||||
|
||||
Will the 410R come with driveshafts that are BRCA legal ?, i don't want to spend £250 on the kit then get a dremel on it to make it legal which it should be in the 1st place
|
#17
|
|||
|
|||
everything should be sorted with the r version i'd hope
paul |
#18
|
||||
|
||||
I would think that the R will come with the new axles...which are what I use.
The thing is, in other parts of the world they are LEGAL for other series, and I think that it is mainly aimed at those regs, not ours. It only takes 2min to do, and its more a case of car performance rather than worrying about taking 2mm off each front axle. I'd rather have a realy good car and take 2mm off the axles, than have a naff car that fitted in the box. |
#19
|
||||
|
||||
+1
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#20
|
|||
|
|||
+1 from me
must admit I didn't rate my dex at first - but I have since realised it was just me (poor driving!!) now I have learned to control the throttle a bit better I have realised the car is spot on! And I am well happy with it - don't even break anymore and I haven't had to do hardly any maintenance (which suits her indoors) Quote:
|
|
|