|
#1
|
|||
|
|||
Big Bore shock setup for KF and K1 aero
OK so I'm new to big bores and would like some advice on setup for the following 2 scenarios
1: High grip astro, bumpy, small jumps outdoors 2: Medium grip carpet, polished floor in places, small jumps and rollers indoors Any advice welcome, I'd like to know everything if possible (pistons, rebound, oil, springs etc.) Thanks in advance
__________________
Current rides: Team Associated B6.1 Kyosho RZ7 Kyosho ZX7 All kept going by PBM Racing |
#2
|
|||
|
|||
I tend to use
FRONT (for indoors) 3 holes, with core rc 450cst shock oil and 4.0 springs REAR 3 holes (drilles out to 1.65mm) with core rc 400cst shock oil and 2.5 or 2.0 springs Hope this helps |
|
|