|
#2321
|
||||
|
||||
Quote:
Not sure what ball studs the DB01R comes with - but the flagship TRF511 comes with cheap almost-comedy quality ball studs that really need replacing. The DB01 ones were ok - as long as they aren't those nasty bright silver ones then they'll be fine. The ball cups work ok if you never pop then on and off - the more you do, the quicker they die basically. They get sloppy quickly from repeated assembly. Tamiya have some grey ball cups on the way - but not available yet. Supposed to be better. On my 501X I used Hot Bodies ball studs (from the D4) and Losi ball cups. The Hot Bodies ball studs are metric (so fit the Tamiyas) but use a smaller imperial sized ball cup like the losi. Use the plastic wing mounts - they flex for a reason. Alloy is a really bad idea. I've never broken one. The front tower on the db01 I think is about as indestructable as you'd want tbh - but the Atomic stuff is nice and I'd definitely consider the rear tower. The alloy steering stuff - pretty worthless in my opinion. It looks great but doesn't really add anything performance wise. The standard hubs are pretty strong to be honest - I think I broke two hub carriers on the front of my Tamiyas over the years (501X, 511, dbo1) and a couple of steering knuckles. The rear hub I never broke. I personally prefer them plastic. The main upgrade on the DB01r would have to be full-metal differential halves instead of the half plastic items carried over from the original db01 (as far as I know anyway). I'd get those ahead of any of the other things you're considering.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#2322
|
|||
|
|||
Jimmy, thanks for the informative reply, i was thinking D4 or tc5 for ballstuds, did u replace the "ball connector nuts" with normal ball studs? im glad losi ball cups will fit
i'll steer clear of all the aluminium stuff, it will be heavier than the plastic anyway, im trying to get the car lighter Agreed, the 501x out drives are a definate on the list, though in the interests of keeping the drive train lighter for 17.5 racing, i'm actually going to run ta05 diffs so i can run plastic out drives with the keyed diff rings, the ta05 layshaft has already been fitted, but for the end of year enduro the metal outdrives will be going in |
#2323
|
||||
|
||||
Hey, I'm not sure what you mean by ball connector nuts?
My DB01 was under 2WD weight with a 3600mah lipo - some cars are a bit sketchy without some weight in there, but the DB01 was very good. Ah, didn't see you were running limited motor class - the stock ones would probably hold up to that anyway to be honest - but I'd not rely on them with anything like a 6.5-7.5 or faster motor. I'd also not use the plastic outdrives for anything quicker. Quick question - are you sure they'll fit? Touring car outdrives aren't as long so you might not be able to get much suspension droop (or any)? I replaced a few non-essential screws with aluminium ones which weigh nothing. But you need to make sure the holes are nice and greased and run a normal screw in and out a few times to loosen them a little. I used the alloy screws to hold on all three top covers. Don't use them on anything else though.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#2324
|
||||
|
||||
my DB01, with essential alloy parts (suspension holders), needs weight to make the minimum weight limit.
As for the TA05 diff outdrives, I really wouldn't bother, as with any loading on them, you will be melting them, you would be far better off chucking the 501X outdrives in there, and just aim at keeping the weight down. In the end, to finish first, first you must finish!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#2325
|
|||
|
|||
the nut connector is that thing like a ballstud, but doesnt have its own threaded shaft, it gets screwed into from the other side, part number 19808012 is what im talking about.
what i dont get is why its said that ta05 outdrives would melt, surely the loading going through a touring cars drivetrain would exceed that of an off roader, ive done 15 runs with the standard db01 plastic outdrives, any i'll test it all, i have 2 months until the state championship starts, i'll get the 501x outdrives, maybe the potential unreliability isnt worth a few grams saved in the drive train What im intrigued about is how ur cars end up so light, can you tell me what they are actually weighing in at? mine is 1700g which i think is 3.75 pounds in ur language, i want to get it down to 3.58 |
#2326
|
||||
|
||||
Mine was I think ~1473g from what I remember.
Tyres are a big part of it - we use Schumacher tyres which are light - the Tamiya kit tyres if thats what you have to use also, are a lot heavier. Touring cars don't get anything like the diff abuse that an offroader gets I imagine - get hung up on a pipe and gun the throttle with one wheel spinning - it'll give the diff a real work out. Not to mention all the hard landings under power.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. Last edited by jimmy; 18-01-2010 at 12:03 PM. |
#2327
|
|||
|
|||
nevermind fusionhobbies having bodies in stock... they don't display on their site that they're out, but a week after placing my order and after asking why my order hasn't shipped yet, they email me that they're out of Baldre bodies..
Seems like i'll have my car this week, but no body.. anyone know a store (preferably Europe or US) that still carry some? |
#2328
|
||||
|
||||
In my TA05, with a 10.5, I have melted the High Precision diff halves... and they won't take the wide range of driveshaft angle, either.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#2329
|
|||
|
|||
1473g? wow thats a major difference, i weighed mine with blockheads on the front, switches on the rear and losi rims all round, i suppose i have heavy electrics, full size jr servo, losi speedy, and im running a big lep heatsink, im getting a tekin rs for it and i'll probaly get a low profile servo thats lighter than my jr
|
#2330
|
|||
|
|||
Baldre bodies
Quote:
|
#2331
|
||||
|
||||
Quote:
|
#2332
|
|||
|
|||
they do have a durga, but I don't like the durga.
oh well, better an ugly body shell, than no body shell. |
#2333
|
||||
|
||||
Quote:
Quote:
So far the only thing that was hurt is the part of the spoiler where it's mounted. Not sure if i'll keep using it though. I got both atomic carbon towers basicly cause i wanted the rear one and it looks nicer with both on instead of just the rear. Also got the alloy steering seems to move around a bit less then the plastic ones. But if its noticeble on the track i doubt it. I've had one problem with the rear hubs and that was a ballstud coming out. The thread was basicly gone from the hub but Tamiya fixed that for the DB-01R by using a screw from the back and a nut ballcup. Still doubting if i'll get the alloy ones from the trf or just fix it like above. |
#2334
|
||||
|
||||
Can anybody tell me what sort of spacers I will need on the control arm shafts when switching to the metal suspension balls? I'm noticing the metal balls are considerably longer than the plastic kit balls. I'm guessing this is gonna alter my wheelbase, and wheelbase adjustment range...
|
#2335
|
|||
|
|||
Hey Carno
Thanks for the feedback, lol and i agree, if you're going to get one atomic carbon shock tower, u might aswell get both so it matches. You're right about the rear hub ball stud on the db01r, it has the screw from the back into the nut ballcup, if i upgrade the ball studs, i'll get ones with long threads and put a nut on the other side Jimmy Re: the touring car out drives, i saw a photo in one of the threads of a durga with the precision out drives in the front diff, and after pm'ing him, he said he hadnt had any dramas using them on the front end and he was running 8.5. i'll check out the ta05 outdrives tonight, but on first glance i didnt see any real difference, i can only try it, i have 2 months to test it all out, if they melt/fall apart, at least i'll know, and if they work, it should help make the car a little bit faster. This is all tamiyas fault anyway, why couldnt they make the big diff rings keyed like the small ones are, lol |
#2336
|
|||
|
|||
Tamiya REALLY need to fix this body situation. It's ridiculous!
FYI - the Baldre body has been discontinued so forget about that. Even in Japan the Durga shell is only available thru special order. Shops do not stock it! Crazy. |
#2337
|
|||
|
|||
lol what are we gonna have to do scotty, buy up Baldre kits just to get the bodies out of them or something, lol
|
#2338
|
||||
|
||||
Quote:
I noticed a tiny reduction in arm play after installing mine with the same kit spacers. Makes the rear arms quite tight with the provided 1mm & 2mm spacers on the shaft. I would like to switch out the 1mm spacer with a .7mm one (same ones from the motor mounting srews) with a .2mm shim on top of that. I think that would make the rear arms perfect. Front end is just perfect with the two .02mm shims used in the standard kit. Reduces just enough play to be tight, but allow movement. I'm sure after I swtich to alloy suspension mounts, everything will change... Now Tamiya needs to make 2.6mm ID shims for outer hinge pins... |
#2339
|
||||
|
||||
I think they do, check out a Tamiya stockist that specialise in TC cars, you might find them.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#2340
|
||||
|
||||
Quote:
It would make it hard for HobbyCo or Tamiya to claim loss of sales for something they don't sell! (Mind you I bet that wouldn't stop HobbyCo) |
|
|