Go Back   oOple.com Forums > General > International fOrums > Aussie

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 23-10-2010
Miguel's Avatar
Miguel Miguel is offline
Member
 
Join Date: Oct 2010
Posts: 8
Unhappy Troubleshooting: DB01

Hi Guys,
I'm a newbie and just bought and assembled a new Durga DB01 and I'm running a Yeah Racing brushless 10T with tamiya slipper clutch and Lipo.

My first 2 test runs were brilliant, the car flew and I started tweaking the camber and steering angles and generally I was having a great old time.

However after my 3rd run in a gravel car park and then on smooth dirt surface the transmission started making a clicking noise so I stopped driving.

I took the spur gear cover and gearbox covers off to inspect but nothing looked out of the ordinary. I took the opportunity to tighten the drive belt tension by 1 click and applied a bit more grease to the diffs.

I then took it for a run and now the clicking has almost disappeared but now the drive isn't going to the wheels 100%. It's as if the motor is spinning hard but the car is only travelling at about 20% full speed. I thought it would be something to do with the slipper clutch so I've tried it on a variety of adjustments but nothing seems to work.

Please help, very frustrated don't what to do from here...

cheers,

Miguel
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com