|
#1
|
||||
|
||||
K1 Understeer
I'm racing on polished wood floors and carpet at the moment and finding it hard to setup my K1aero. The main problem is apex and exit understeer!!! So was hoping someone may have an idea. Thanks
|
#2
|
||||
|
||||
Have a chat with James and Issac Mcfadyean at Batley Shawn. They run the same car.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
||||
|
||||
Try increasing the front and rear camber to 2*, run 1* toe in on the front and shorten the rear camber link or lower the inside rear ball stud.
Last edited by h0m3sy; 09-02-2015 at 11:38 PM. |
#4
|
||||
|
||||
Thanks for your help guys.
|
#5
|
||||
|
||||
What tyres are you using? and do you have the gear diffs front and rear?
|
#6
|
||||
|
||||
Using yellow mini pins front and rear and yep running gear diffs. But my ball diffs arrive tomorrow and been told that they make a massive difference.
|
#7
|
||||
|
||||
Try the diffs and see what its like. I ran the ball diff just in the front with a gear diff in the rear and it certainly made it easier to drive and more predictable. Have not changed the car set up wise and it works well at most tracks we go to indoors. Did try the ball diff in the rear on Sunday at Worksop after two rounds and the car looked a touch easier to drive and Isaac did say it was and his times were improved. If your at Chadderton on Sunday i will be more than happy to have a look and help if i can. Cheers.
|
#8
|
||||
|
||||
Quote:
|
#9
|
||||
|
||||
Quote:
|
#10
|
||||
|
||||
How did you get on with the ball diffs? What other changes did you make?
|
#11
|
||||
|
||||
A lot better with ball diffs in and took off 1 degree of toe in off the rear. Ride height was 18mm all round with 1 degree of negative camber on all for corners. No power on understeer at all that I noticed.
|
#12
|
||||
|
||||
Happy Days
|
#13
|
||||
|
||||
Yep!!! I just need to get better now to do the car justice
|
|
|