Bullistorm ESC

[dobber]

Nice one, I'll look forward to seeing it in action next week. They do seem amazing value for money if they are reliable

[fotko]

Just received program box and checked software on the 60A version. It has 518stock program, I changed it to 930 MOD

[OneKiwi]

Originally Posted by fotko

Just received program box and checked software on the 60A version. It has 518stock program, I changed it to 930 MOD

How did you do that?

[fidspeed]

get 2 in 1 program LCD box ( if you havent got one ) load hobbwing software programme on laptop or PC connect to car via usb and bingo !!

if you need more help PM me ill talk you through it

theres lots of info and vids on you tube remember these are a blatant copy of HW products but the software does work

regards dave

[cigbunt]

How long it did take to get this delivered?

[OneKiwi]

About 14-20 days

[fidspeed]

my 60 A + 17.5t sensored motor arrived it was about 3 weeks (normal for HK stuff if sent free)

not wired up yet dont expect too many problems as i already have one

regards Dave

[OneKiwi]

Got it sorted I used a usb cable that didn't work.. banging my head as it wouldn't connect to the PC and in the process of the frustration of a late night and little stess I connected the + and - wrong and fried it

Anyway I was really happy with it in the few training runs I got at the track.

Unfortunately I couldn't give it race condition testing.

I have now updated the 60A I have to V3 mod software, with what this software did for my motor temps with the SP esc I hope I won't have any problems with it and a 8.5 LRP x12 later this week.

Hopefully I can use the caps from it as back ups to the SP esc.

[OneKiwi]

I have now installed the 17.5 and the 60A for the son, but when I have that motor connected I get one red light on all the time and a constant beeeeep/tone.

Anyone know what the problem is?

I have tested another esc and another motor and narrowed it down to the motor, what could it be?

[Big paul]

May be the board in the motor some thing may have come un-soldered when attaching the motor wires.

[MHeadling]

So how are things going so far with this speedo??

I'm thinking of trying one on a SP 7.5 in my B44

[Aran]

I might be ordering some from the manufacturers if anyone is interested, they look like a good buy.

[fotko]

Tomorrow I have race with my bullistorm 60A esc with SP 6,5T in my B4XL. Then I let you know how perform it :-)

[andyroooo]

still waiting on mine being delivered, i think they strapped it to a tortoise and sent it on its way!!

[fidspeed]

it will be 3 weeks delivery i could have fetched on my bike quicker !!

mine installed in mardave ready to go now with 15.5 1s powered
as previous post plug fan in wrongway round into socket or it wont work (my first one died this way )

if your running in buggies watch your settings mine came with 422 stock which may be heavy power wise in a buggy on 6.5 motors im only using in mardaves and tc at moment in buggy i will stick to xerun 120 from racer in exile or giant cod there is a reason there only £30

regards dave

[cigbunt]

i've just won a 120a with prog card for £27.00

do i need to change the software before use? which is advised..?
also it seems there are a few reports of the fans packing up on 1st use can any one confirm over wise?

if it works happy days

[fidspeed]

just put the kettle on and wait for 3 weeks it will turn up mine always have i have 3 now

when you wire up leave fan un plugged to test and set up endpoints etc . when ready gently plug in fan wrong way round be ready to pullout swiftly all of mine have had to be plugged in reverse to work

not sure what software comes on 120 a i have 60 a and they have 422 stock with turbo functions enabled poss a speedo killer on a modified motor

pm me if you need more info

regards dave

[fotko]

So, today we had race on carpet. I raced B4 with T4 chassis. ESC was Bullistorm 60A, motor SpeedPassion 6,5T. I put 930MOD software. I finnished on 3. place without problems with this ESC Love it for the price

[OneKiwi]

I thought you would have to have the 120A with a 6.5T motor.

Nice to see that the 60A is working fine, maybe with that stock software it runs hot.

Im going to have to try that with my 2WD/8.5 and maybe a 6.5 in a 4wd but that I am thinking will be too much for the esc.

[jokersat]

so whitch to bye Bullistorm 120A or hobbywing 120A is the same quality as the hobbywing ESC or a cheap chinezzzz copy....