Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 5 Days Ago
Jonesy42 Jonesy42 is offline
New Member
 
Join Date: Sep 2018
Posts: 2
Default Steering problems

Hi guys, got a problem with my steering if anyone can help 😬, I was Driving last night and during the sessions I would get a delay of about a 1 - 1.5 secs in the steering, which would cause me to go straight on into the barriers . But it would only happen once maybe twice in the session, after 3-4 mins of driving...
Iíve looked at the obvious being connectors and they all look fine, any tips / help will be much appreciated 👍🏻
Reply With Quote
  #2  
Old 5 Days Ago
MiCk B.'s Avatar
MiCk B. MiCk B. is online now
oOple Advertiser
 
Join Date: Nov 2006
Location: Dublin, Ireland
Posts: 1,323
Default

Hi,


Does the servo get hot at all.

Or have you tried a different servo and see if it still happens.




MiCk B. :-)
__________________
http://www.dublinmodelracing.com/
(Off-road racing in Dublin)

http://www.p-dubracing.co.uk
(Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations)

http://www.msdmodels.ie/
(Trackside and on-line RC supplies.)

Reply With Quote
  #3  
Old 5 Days Ago
Jonesy42 Jonesy42 is offline
New Member
 
Join Date: Sep 2018
Posts: 2
Default

Hi mick, the servo is nearly new as only driven couple times with it, but saying that my dad has purchased the same one at the same time and his has failed already by the gear breaking inside, so might have to have a look at trying another one I think, didnít check the temp of the servo but will keep an eye on that 👍🏻
Reply With Quote
  #4  
Old 5 Days Ago
Yorkiebar Yorkiebar is offline
Member
 
Join Date: Mar 2018
Posts: 100
Default

Also sounds like symptoms of a "brown out" where the RX loses signal.

What servo, ESC, RX, motor & cells?
__________________
Back from 30 year retirement finding use for my thumbs again, still rubbish.
Reply With Quote
  #5  
Old 4 Days Ago
fidspeed's Avatar
fidspeed fidspeed is offline
Mad Member
 
Join Date: Dec 2009
Posts: 1,146
Default

More questions ?
Are you using spectrum radio gear with savox servos ?

Savox servos can be a bit power hungry and combined with spectrum as previous post alluded to can get this radio signal loss or Brown out

If so try a voltage booster in a spare rx port it often cures issue
Regards Dave
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
oOple.com