|
#1
|
|||
|
|||
Official Pictures of the DEX410R!!
Check this out, official pictures of the Durango DEX410R from the Team Durango website!
Looks sweet and at a street price of £210 its a bargain! http://www.team-durango.com/blog/ Craig Collinson |
#2
|
||||
|
||||
Craig, I hope you drive faster then you post news, your a couple of hours late with this
__________________
Model Junction, Boughton Raceway. |
#3
|
||||
|
||||
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
|||
|
|||
What can i say Mark, busy times at wrk. Im still in the office now!
|
#5
|
||||
|
||||
These do look very nice....coming from 1/8 then alloy chassis, proper CVD driveshafts and gear diffs are more my bag! Why the front hex but a rear pin for drive? Why not the same for both??
Also, do these take saddle packs?
__________________
Losi Muggy-R (Spek, SH .28, 48T Spur, Steering mod, ACE) Losi 8Te (Castle MMM, 2200kv, Hyperion 6500mah 4s 35C Lipo, RC-M motor mount, Losi battery/radio tray) Maverick Atom XB 1/18 (Spek) Associated B4RS (Spek, Castle MM/5700KV, Lipo) Associated SC10 (Spek, Novak/8.5 Turnigy, Lipo) www.ddgraphics.co.uk |
#6
|
||||
|
||||
__________________
ATOMIC CARBON S2 Swb KYOSHO ZX5 FS2 SP RB6 www.mikovic.com Team GRIFF TOUCH 4 EVER |
#7
|
||||
|
||||
those alloy shock towers look thin and mighty bendy!
|
#8
|
||||
|
||||
Quote:
yes saddle only
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#9
|
||||
|
||||
there felt very stiff when i tried to flex em!
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#10
|
||||
|
||||
do you mean john?
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#11
|
|||
|
|||
Do you know if lipo spec 2010 holder is direct fit to dex410 ??
And also are these cvd better than on dex410? Thank you |
#12
|
|||
|
|||
notice no roll bars - are these critical on the "premium" DEX410 and so a 'must buy' on the R?
|
#13
|
|||
|
|||
Looks very nice!!!!!!!! So many people are going to buy it now. I have a question how can i make my dex410 fit a 25mm battery????? can i buy parts from dex410r to make that work?
Thanks |
#14
|
||||
|
||||
No shock, outdrive, or cvd boots, but that's an easy upgrade.
Alu towers might bend, but might not break as easily. Still, an easy upgrade. I want the 2mm pin shafts/cvd's, plastic braces, and 25mm battery strap for my 410. They did a great job with the 410R! But, what else is new?!! TD Rocks!
__________________
4PK, DEX408v2, DEX410 Pro, DESC410, DEX210v2 MOTOCROSS: Because Rollercoasters Are Too Slow!
|
#15
|
||||
|
||||
Not used mine yet, so I wouldn't say they are a must buy, but then different tracks, different drivers, might be a different story.
__________________
Model Junction, Boughton Raceway. |
#16
|
||||
|
||||
There really is no hope for the lad is there Mark!
__________________
Model Junction, Boughton Raceway. |
#17
|
|||
|
|||
Can I modify my DEX410 with the new 25mm battery strap to fit my lipos?
Which parts are required, if this mod. would be OK ? |
#18
|
||||
|
||||
As far as I know, the spur/slipper sit higher on the 'R'. So I would think that the centre mount is a touch higher so would have to be purchased to fit the deeper LiPo's.
I could be wrong though, so don't take my word for it. |
#19
|
||||
|
||||
Correct sir
__________________
MB Models....Team Durango....Telsshells....韦恩是一个无线电遥控赛车上帝,克雷格是同性恋
|
|
|