|
|
#1
|
|||
|
|||
Yoke Identity
So what I think I have here is a yoke 870C and a '91 works, I do have the chassis for both (which would probably make identification easier) but not with me at the moment.
I have smalls for both and magnesium motor mounts and rear bulk heads, one pictured is an alloy one. Are the front bulkheads readily available? would prefer alloy ones TBH. |
#2
|
|||
|
|||
left pic is an 870C and right pic is indeed a Works '91.
Bulkheads are hard to find. Try eBay or Vintage Kokomo forum on FB. Good luck. |
#3
|
||||
|
||||
Like NJ has said 870c on the left and works parts on the right. The works parts are 91 front tower with 92 rear tower and hubs if the car came like hay I’m guessing it’ll be a 92 with just the 91 towers, what pitch were the belts the fine pitch M2 or be more corse like modern cars M3?
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#4
|
|||
|
|||
Quote:
|
#5
|
||||
|
||||
The yr4 diffs and motormount will work and the front C hubs and knuckles will work too but the front belt will be different to the yr4 not sure if the rears the same
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#6
|
|||
|
|||
Thought the hubs and carriers all looked familiar when I was cleaning them up, have enough diff parts and spares for both cars.
Are the wishbones era correct for the '91 or '92? |
Thread Tools | |
Display Modes | |
|
|