|
#1
|
|||
|
|||
Schumacher kf set up
Hi I have 6.5T motor what the right spur gear & pinion gear to use on astro surface thank you ?
|
#2
|
||||
|
||||
Hi we run 76/25 and up to 27pinion.
|
#3
|
|||
|
|||
Hi thanks for info I'm going to put a new belt on what one should I go for for racing on astro !!!
|
#4
|
||||
|
||||
4mm Bando Belt
|
#5
|
|||
|
|||
But which one 113T or the 117T ??
|
#6
|
||||
|
||||
25-27 pinion sounds a little high for a 6.5T motor, I run a 24 pinion with my 7.5T. I would start off with a 23 pinion and 76 spur.
You need to select the right belt for your layout. Standard saddle layout 113T U4474 Low grip 103T U4323 Standard chassis with shorty lipo 117T U4494 Regards, James.
__________________
|
#7
|
||||
|
||||
Hi we run the low grip setup with the 103t belt. Running 25/27 76spur takes the sting out of the motor but gives good top end. We've never had any over heating problems. We run at Southport on astro
|
#8
|
||||
|
||||
with these mentioned pinion sizes it sounds like my 27 tooth pinion on a 10.5 aint far off the money
|
|
|