DESC410 need good setup for carpet!

[daywalker]

Hi everyone!
Could somebody tel me good setup for my short course.
I've tried a lots of setup I use more oils and still not enough of rear traction when you aggressively driving, but the truck is not tightly controlledI don't know what happens. Please help.

This is my current setup is:
tires - Pro-line Pin Point

front shocks:
1.2*6 piston, 2mm limiter inside, 2K oil night blue white springs (hardest possible)
rear shocks:
1.2*6 piston 1k oil night blue white springs (hardest possible)

rear down stops - 3mm

diffs oils:
rear and front - 10k; center - 50K

clearance - rear 16 mm, front 15 mm

rollbars - front 1.5 mm; rear 1.3 mm
additional weight on rear near 120 gram.

motor LRPX12L 5.0T

pins on tire doesn't cut.
body proline flo-tek

last time run on EOS in Germany last week.

Thanks for every true comment

[Paultje040]

Start with softer springs and oil. You'll gain some grip from that. Also check your roll center.

I race a multi surface track. (Mostly carpet) we dont use springs that hard. Mostly 1 to 2 springs harder than kit standard (Durnago, Losi, Yokomo 2 and 4wd)

I cant think of a setup with those springrates.

Check the durangosite for setups.