|
||
|
 |
|
||||||||||||||||||
|
#43
29-01-2011
|
|||
|
|||
Sooo, here are our Pictures from our new Steering!
Greets Kim When someone wants 1 Steering Brace! Write me an PM! i give you the Mail Adress from the Man who make this Things! 
|
|
#44
31-01-2011
|
||||
|
||||
|
Nice solution there Highjumper, in a lot of ways better than the bridge based mods most are doing. Is that a pressed / stamped piece? What put me off that style of plate was that the ball studs need to screw into a surface lower than the top face teh bearing would sit on ... a stamped part would sort that out nicely!
The only downside I can see is that you can not make fine adjustments to ackerman but since most people don't make subtle changes in that area I'm sure it would be fine for most. Good work.
|
|
#46
01-02-2011
|
|||
|
|||
|
Am i seeing things or is the motor and servo in the pics above on the wrong side ? and also is that a 1 way I see going into the front gearbox ? Would like to see the whole car in a pic.
__________________
MOST important don't crash. Kyosho DB1 Kyosho Vega RB5 GenII Kyosho RB 6.7 MB MODELS www.rccarshop.co.uk www.ghostrc.co.uk
|
|
#48
02-02-2011
|
|||
|
|||
|
Yes, Good Eys .
The Motor is on the other Side, Right! Because i Think that the Car ist easier to drive,because the Rotation of the Motor/ Magnet ist going INTO the CAR. i personal think it feels better! And Yes, the Car have Durango Diffs in the Front and the REAR. I am testing this. We will see. The complete Picture from my Car do you get at the Weekend, when i have my new Orion Speedo´s and Motors! Or every One can see the Car at the EIR 2011 in Belgium. Greets Kim
|
|
#49
02-02-2011
|
||||
|
||||
|
Roger,
It looks like BMS that has been machined.
|
|
#51
02-02-2011
|
|||
|
|||
|
The Durango Diffs fit in without problems! You need only a little more shims! on the Right and left side! And the STEEL Part, which you fit in the Main Shaft.
On Astro Turf i gote sometimes Problems with the Plastik Parts, but there was the Slipper completly closed! Greets Kim
|
|
#52
08-02-2011
|
||||
|
||||
|
This has just turned up..
 Quality is superb... i'll get some measurements up when ive done them.. Width.. hole center are ??mm width.. ?mm between stud centers going forward. I havent a kit part to measure to see how it compares.. email this chap... MarkusMetsch@gmx.de 
|
|
#53
08-02-2011
|
||||
|
||||
|
That is nice, looks well made. So long as the bearing fit is good (which I have no doubt it will be) then I think he is on to a winner here.
Nick, I am not sure he would appreciate you putting the measurements up on line for the "copy cats" to use so can I ask you to ask his permision before you do.
|
|
#54
08-02-2011
|
||||
|
||||
|
Quote:
|
|
#55
08-02-2011
|
|||
|
|||
|
Yes, Markus and i Made this Thing for my Car! And this is not the first one!! So Please keep it in Secrets! If someone will have one, they can Write him!
I Think the Price is more than Fair. Greets from Germany! Kim
|
|
#57
09-02-2011
|
||||
|
||||
|
That is a super price.
Let me know how that works Nic as i might be needing one :-)
|
|
#58
18-02-2011
|
|||
|
|||
|
For those of you who have all been asking, the Ellis Ackerman Steering Mod is now available from stock..........
See here for more info.. http://www.oople.com/forums/showthre...398#post465398
__________________
 ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
 |
|
|
KYOSHO
Linear Mode
