|
#1
|
||||
|
||||
Hobbywing v3.1
Is it possible to disable the power down function on the 3.1?
I have a habit of holding my brake on from when I ran nitro and the esc keeps shutting down😂. The setting isn't available off the program t but was wondering if you could do it through the PC?
__________________
HB Racing E819RS HB Racing D2 Evo HB Racing D4 Evo3 |
#2
|
||||
|
||||
Hi,
I'm not 100% but I think it's an option on the software. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
It used to be an option but not with latest firmware.
What you can do is set brake side epa to 99% and that should do it. |
#4
|
||||
|
||||
its an option on xr10 and was on v3.1 via wifi module
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#5
|
||||
|
||||
So if I borrow a wifi module I should be able to turn it off?🤔
__________________
HB Racing E819RS HB Racing D2 Evo HB Racing D4 Evo3 |
#6
|
||||
|
||||
Quote:
oddly the option is on my xr10 still
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD Last edited by mark christopher; 23-09-2019 at 08:39 PM. |
#7
|
||||
|
||||
Turned my brake epa down to 92%, this is the highest the EPA can be for it not to activate the shut down☹️
__________________
HB Racing E819RS HB Racing D2 Evo HB Racing D4 Evo3 |
|
|