|
#1
|
|||
|
|||
K2 alloy yoke bushings
Hi, just found out that one of my yokes have no bushing - as bought used donno, did I lose it during maintenance or previous owner didn't mention it.
Question - do i need to get whole 7.5 yokes again, or those bushings where wishbone screw goes can be replaced? |
#2
|
||||
|
||||
Hello,
May you can contact Schumacher direktly, as the brass bushings should not come out that easy because they should be pressed in, possible they can help you out with a single bushing, or do a replace by goodwill!? If that does not happen and you dont want to spend the money on the aloy yokes, you can use the kit plastic once, but they do have 10*, not 7.5 like the aloy one...
__________________
Greetings from Austria! My cars: CatK2/CougarSVR/BossCat/Dex410v3/Dex410v5/Dex210/Dex210F/Yokomo yz-10‘94/Yokomo yz-10‘95/ Last edited by micholix; 25-11-2016 at 08:32 AM. |
#3
|
|||
|
|||
Thanks, wrote to them.
Will have to think of something for race in Sunday, as I have understood, 7.5 perform a lot better on tight carpet track, maybe temporary replace it with fuel tube for example, so there wouldn't be much play. |
#4
|
||||
|
||||
Yes, the 7.5 does make the steering feel a bit more agressive.
__________________
Greetings from Austria! My cars: CatK2/CougarSVR/BossCat/Dex410v3/Dex410v5/Dex210/Dex210F/Yokomo yz-10‘94/Yokomo yz-10‘95/ |
|
|